Tethered Shooting Software HS-V5 for Windows®

The additional function below can be used.
　・Backup/restore of camera setting for tethered shooting.
　・Tethered shooting via USB or Wi-Fi.

The additional function below can be used.
・Backup/restore of camera setting for tethered shooting.
・Tethered shooting via USB or Wi-Fi.

*To use the new functions, upgrade the firmware of X-Pro2 to ver.4.00.

X-Pro2 Camera Body Firmware Update

*This function can be used with GFX 50S ver. 1.10 or newer and X-T2 ver.2.10 or newer. If the firmware version of a camera is older than that, firmware upgrade is required.

For detail, visit the URL below.

GFX 50S Camera Body Firmware Update
X-T2 Camera Body Firmware Update

* To use the Tether shooting by wireless communication, an additional setting is required. For detail of the setting, refer to the setting manual.

How to set

• GFX 50S
• X-T2

When Tether Shooting Software HS-V5 is used, this function can save all camera settings as a file and restore the setting from a stored setting. Therefore, you can change the camera settings at a moment and copy them to multiple cameras.
*This function can be used with X-T1 ver.5.20 or newer. If the firmware version of a camera is older than that, firmware upgrade is required.
X-T1 Camera Body Firmware

Edit this Imaegs.

Edit this texts.
Update

FUJIFILM X-T2 (firmware version 1.10 or later) is supported in USB tether shooting function.
* Before connecting X-T2 to the PC, set “PC SHOOT MODE” of “CONNECTION SETTING” in SETUP menu to “USB AUTO”.
X-T2 Camera Body Firmware Update

The features of HS-V5 with X-T1 and with X-T2 are different.
Please refer the document below in detail.

Features of HS-V5 with X-T1and with X-T2(PDF)

[Quick Start Guide Errata]   *Description in the [ ] is for menu name of X-T2
USB MODE/[PC SHOOT MODE]
The available modes are described below (the options availability may differ depending on the camera).
Select MTP(PTP)/ [OFF] or PC SHOOT AUTO/[USB AUTO] when not using HS-V5.

• MTP(PTP) / [OFF] : Select this option (the default setting) to copy pictures on the memory card in the camera to the PC when connecting a USB cable.
• PC SHOOT AUTO /[USB AUTO]: Tethered shooting mode is selected automatically when the camera is connected to a computer via USB. Pictures taken using tethered shooting are saved to the computer at the default setting of HS-V5.* When the camera is not connected, the camera operates in s stand-alone mode, and taken pictures are saved to camera’s memory card.
• PC SHOOT FIXED /[USB FIXED] : The camera operates in tethered shooting mode, regardless of the USB cable connection. Pictures taken while the camera is connected and tethered shooting is activated; at default settings, HS-V5 does not leave a copy on the camera memory card.*

On PC shooting, image data stored both to PC and SD card can have the same file name.
In case “IMAGE QUALITY” is set to “FINE+RAW” or “NORMAL+RAW” and the destinations to store (PC or SD card) for each of JPEG data and RAW data are divided, each data can have the same name except for file extension.

[How to set]
Click setting button on upper right of the window and select “Save File Name” > “Original filename”.
*Initial setting of “Save File name” just after the upgrade is “Original filename”.

*The firmware of “FUJIFILM X-T1” needs to be upgraded to version 4.30 or later.

X-T1 Camera Body Firmware Update

Addition of compatibility with firmware version 4.00 of X-T1.
This update enables you to use the functions below.

• Zone and Wide/Tracking modes with 77 autofocus points can be used in addition to the current 49-single-point autofocus system.
  Selection of the AF MODE in the AUTOFOCUS SETTING will become SINGLE POINT, ZONE and WIDE/TRACKING”.
• The Auto Macro function is added. You no longer have to press the Macro button to initiate a close-up shot.
  This update eliminates the Macro function assigned to the Macro Button.
• You can use the Exposure Compensation dial to make exposure adjustments while PC SHOOT mode in the Manual exposure mode with the ISO Auto setting.