This website uses cookies. By using the site you are agreeing to our Privacy Policy.

Tethered Shooting Software HS-V5 for Windows®

Windows Version: 1.12.0

Last Updated: 11.29.2018

Overview

Only the user who has CD-ROM “Tethered Shooting Software HS-V5” can use this updater.
This updater updates Tethered Shooting Software HS-V5 for Windows® to its latest version.

 

Compatibility
Tethered Shooting Software HS-V5 compatibility chart

* To use the software, you need a Windows PC installed with “Tethered Shooting Software HS-V5 Ver.1.1 – Ver.1.7”
* After May 31, 2019, Fujifilm will no longer provide camera compatibility upgrade or OS support for HS-V5.

Notes

Please read this update after refreshing this page.

  • In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the “Control” key and “F5” key.
  • In case of Mac (Safari / Google Chrome), hold down the “Command” key and “R” key.
  • In case of Mac (FireFox), hold down the “Command”, “Shift” and “R” keys at same time.
  • Windows

Detail of the software update

Ver.1.12.0

The software update Ver.1.12.0 incorporates the following issue:

The compatibility of tethered shooting with "FUJIFILM GFX 50R" is added.

The additional function below can be used.
 ・Backup/restore of camera setting for tethered shooting.
 ・Tethered shooting via USB or Wi-Fi.

Ver.1.11.0

The software update Ver.1.11.0 from Ver.1.8 incorporates the following issue:

The compatibility of tethered shooting with "FUJIFILM X-T3" is added.

The additional function below can be used.
 ・Backup/restore of camera setting for tethered shooting.
 ・Tethered shooting via USB or Wi-Fi.

Ver.1.8

The software update Ver.1.8 from Ver.1.7 incorporates the following issue:

The compatibility of tethered shooting with "FUJIFILM X-H1" is added.

The additional function below can be used.
・Backup/restore of camera setting for tethered shooting.
・Tethered shooting via USB or Wi-Fi.

Ver.1.7

The software update Ver.1.7 from Ver.1.6 incorporates the following issue:

*To use the new functions, upgrade the firmware of X-Pro2 to ver.4.00.

*To use the new functions, upgrade the firmware of X-Pro2 to ver.4.00.

X-Pro2 Camera Body Firmware Update

Ver.1.6

The software update Ver.1.6 from Ver.1.4 incorporates the following issues:

Tether shooting is available by wireless communication for GFX 50S and X-T2

*This function can be used with GFX 50S ver. 1.10 or newer and X-T2 ver.2.10 or newer. If the firmware version of a camera is older than that, firmware upgrade is required.

For detail, visit the URL below.

GFX 50S Camera Body Firmware Update
X-T2 Camera Body Firmware Update

* To use the Tether shooting by wireless communication, an additional setting is required. For detail of the setting, refer to the setting manual.

How to set

BACKUP & RESTORE function is added in USER SETTING for Tether shooting function.

When Tether Shooting Software HS-V5 is used, this function can save all camera settings as a file and restore the setting from a stored setting. Therefore, you can change the camera settings at a moment and copy them to multiple cameras.
*This function can be used with X-T1 ver.5.20 or newer. If the firmware version of a camera is older than that, firmware upgrade is required.
X-T1 Camera Body Firmware


Edit this Imaegs.

Edit this texts.
Update

 

Ver.1.4

The software update Ver.1.4 from Ver.1.3 incorporates the following issues:

The compatibility of tethered shooting with "FUJIFILM GFX 50S" is added.

Ver.1.3

The software update Ver.1.3 from Ver.1.2 incorporates the following issues:

FUJIFILM X-T2 (firmware version 1.10 or later) is supported in USB tether shooting function.

FUJIFILM X-T2 (firmware version 1.10 or later) is supported in USB tether shooting function.
* Before connecting X-T2 to the PC, set “PC SHOOT MODE” of “CONNECTION SETTING” in SETUP menu to “USB AUTO”.
X-T2 Camera Body Firmware Update

The features of HS-V5 with X-T1 and with X-T2 are different.
Please refer the document below in detail.

Features of HS-V5 with X-T1and with X-T2(PDF)

[Quick Start Guide Errata]   *Description in the [ ] is for menu name of X-T2
USB MODE/[PC SHOOT MODE]
The available modes are described below (the options availability may differ depending on the camera).
Select MTP(PTP)/ [OFF] or PC SHOOT AUTO/[USB AUTO] when not using HS-V5.

  • MTP(PTP) / [OFF] : Select this option (the default setting) to copy pictures on the memory card in the camera to the PC when connecting a USB cable.
  • PC SHOOT AUTO /[USB AUTO]: Tethered shooting mode is selected automatically when the camera is connected to a computer via USB. Pictures taken using tethered shooting are saved to the computer at the default setting of HS-V5.* When the camera is not connected, the camera operates in s stand-alone mode, and taken pictures are saved to camera’s memory card.
  • PC SHOOT FIXED /[USB FIXED] : The camera operates in tethered shooting mode, regardless of the USB cable connection. Pictures taken while the camera is connected and tethered shooting is activated; at default settings, HS-V5 does not leave a copy on the camera memory card.*

Ver.1.2

The software update Ver.1.2 incorporates the following issues:

On PC shooting, image data stored both to PC and SD card can have the same file name.

On PC shooting, image data stored both to PC and SD card can have the same file name.
In case “IMAGE QUALITY” is set to “FINE+RAW” or “NORMAL+RAW” and the destinations to store (PC or SD card) for each of JPEG data and RAW data are divided, each data can have the same name except for file extension.

[How to set]
Click setting button on upper right of the window and select “Save File Name” > “Original filename”.
*Initial setting of “Save File name” just after the upgrade is “Original filename”.

*The firmware of “FUJIFILM X-T1” needs to be upgraded to version 4.30 or later.

X-T1 Camera Body Firmware Update

Addition of compatibility with firmware version 4.00 of X-T1.
This update enables you to use the functions below.

  • Zone and Wide/Tracking modes with 77 autofocus points can be used in addition to the current 49-single-point autofocus system.
    Selection of the AF MODE in the AUTOFOCUS SETTING will become SINGLE POINT, ZONE and WIDE/TRACKING”.
  • The Auto Macro function is added. You no longer have to press the Macro button to initiate a close-up shot.
    This update eliminates the Macro function assigned to the Macro Button.
  • You can use the Exposure Compensation dial to make exposure adjustments while PC SHOOT mode in the Manual exposure mode with the ISO Auto setting.

How to Install

  1. Download the exe file from this page.
  2. Double click the downloaded exe file to run setup. Install it following directions appeared on dialogs.
  3. Once the installation is completed, click “Complete” button in the dialog appeared.

System Requirements

OS*Windows 10 (x86/x64), Windows 8.1 (x86/x64), Windows 7 SP1 (x86/x64)
CPUIntel Pentium® processor-based PC or compatible computer. (Core 2 Quad or later is recommended)
RAM2GB or later is recommended
* Other versions of Windows are not supported. Only pre-installed operating systems are supported; operation is not guaranteed on home-built PCs or PCs that have been upgraded from earlier versions of Windows.

Download

License Agreement

Please read this Agreement carefully before downloading this upgraded version software (“SOFTWARE”). By downloading SOFTWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download SOFTWARE.

Article 1. License

SOFTWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you bundled with FUJI’s product(s) (“ORIGINAL SOFTWARE”). FUJI grants you a non-exclusive license to use SOFTWARE, provided that you have been granted by FUJI a valid license to use ORIGINAL SOFTWARE. Except as set forth herein, SOFTWARE is licensed to you subject to the terms of the license agreement as to ORIGINAL SOFTWARE. All copyrights and other proprietary rights to SOFTWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 2. NO Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.

DownloadFile name: HS-V5UP1120.exe
  • Windows

Download

License Agreement

Please read this Agreement carefully before downloading this upgraded version software (“SOFTWARE”). By downloading SOFTWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download SOFTWARE.

Article 1. License

SOFTWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you bundled with FUJI’s product(s) (“ORIGINAL SOFTWARE”). FUJI grants you a non-exclusive license to use SOFTWARE, provided that you have been granted by FUJI a valid license to use ORIGINAL SOFTWARE. Except as set forth herein, SOFTWARE is licensed to you subject to the terms of the license agreement as to ORIGINAL SOFTWARE. All copyrights and other proprietary rights to SOFTWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 2. NO Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.

License Agreement

Please read this Agreement carefully before downloading this upgraded version software (“FIRMWARE”). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.

Article 1. License

FIRMWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you included with FUJI’s product(s) (“ORIGINAL FIRMWARE”). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 2. NO Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.

Article 3. Restrictions

You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.