X-H1 ファームウエアの更新

With an XF or XC optical image stabilized lens, in-body image stabilization worked with 3 axis (up and down / optical axis rotation). The remaining 2 axis (right and left pitch, yaw angle) was controlled by optical image stabilization in the 　lens. This firmware has a new image stabilization algorithm to allow the in-body image stabilization to work in all 5 axis and to achieve more than five-stops (up to the equivalent of 5.5 stops (*1)) image stabilization by cooperative control 　according to the types of frequency and blur amount.
To activate this function, lenses are necessary to be updated to latest firmware version. Please check the latest firmware version from the link below.
Camera Body / Lens Firmware Compatibility Table
*1：Based on CIPA standards. When using XF10-24mmF4 R OIS, XF18-55mmF2.8-4 R LM OIS, and XC16-50mmF3.5-5.6 OIS II.
Regarding the image stabilization performance, refer to the list of “Cooperative control by in-body and optical image stabilization with firmware ver.2.00 of X-H1”.
“Cooperative control by in-body and optical image stabilization with firmware ver.2.00 of X-H1”(PDF:8.00KB)

Eliminate image shake when panning slowly when movie recording or on the live view image.

Movie files are no longer split when the file reaches 4GB file size. The file is recorded as one file providing an SD memory card greater than 32GB is used (excludes 32GB) (*2).
*2：By using SD memory cards less than or equal to 32GB, movie recording will continue without interruption when the file size reaches 4GB, however subsequent footage will be recorded to a separate file.
Note：Format SD memory cards before first use, and be sure to reformat all memory cards after using them in a computer or other device.

Color temperature (Kelvin) can be displayed on EVF/LCD.

Power supply icon is displayed on EVF/LCD while using AC adapter (AC-9VS), or Anker PowerCore+ 26800 PD(*3) and Anker PowerCore Speed 20000 PD(*4).
*3：Anker and PowerCore are trademark or registered trademark of Anker Innovations Limited or associated companies.
*4：Product may not be available on your country.

・Focus Preset Function
・Focus Control button

Applicable lenses : XF80mmF2.8 R LM OIS WR Macro, XF200mmF2 R LM OIS WR, XF50-140mmF2.8 R LM OIS WR, XF100-400mmF4.5-5.6 R LM OIS WR

*Upgrade the firmware of a camera before upgrading the firmware of a lens.
Camera Body / Lens Firmware Compatibility Table

The update will enable the photographer to shoot focus distance bracketing up to 999 frames. When the photographer begins shooting, the focal location is shifted with each activation of the shutter by the step of focus shift set from 1 to 10.

The upgrade will add compatibility for the newly developed FUJINON MKX18-55mmT2.9 lens and FUJINON MKX50-135mmT2.9 lens
1) Aperture information can be displayed on the monitor. The upgrade allows users to select T-stop or F-stop.
2) The upgrade allows users to check the focus distance with the distance indicator shown on the monitor.
3) Automatically corrects the distortion and the color/brightness shading.
4) Camera automatically calculate the White Balance based on the lens position and deliver the color expressions with Film Simulation modes.

The upgrade allows users to enlarge indicators and information in the viewfinder and/or LCD monitor. This upgrade will also enable users to customize the location of where the information is shown on the display.

Enabled phase detection AF at smallest area size when in single point AF, making phase detection AF active all 6 area sizes both in AF-S/AF-C mode.
 

Phase detection AF is now available in the smallest size single AF point when shooting in AF-S and AF-C modes. This takes the total phase detection AF areas to 6.

The upgrade allows users to utilize the following functions with the latest “FUJFIILM Camera Remote” app. 　
1) It synchronizes “date and time” and/or “location information” of smartphone and tablet devices when used with cameras with Bluetooth® capability 　
2) The upgrade allows users to select multiple smartphones or tablet devices by paring the cameras.(Up to 7 devices) 
3) Update the firmware** of compatible cameras that offer Bluetooth® capability via smartphone or tablet devices.
4) It supports Bluetooth® wireless remote control camera shutter release** for cameras that offer Bluetooth® capability.
* The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by FUJIFILM Corporation is under license.
** An upgrade to the latest “FUJIFILM Camera Remote (Ver.3.2.0)” is required to operate firmware update and camera shutter release.

The upgrade allows users to set the Fn button as “IS Mode” for quicker setting changes.

Once connecting a camera to a computer via USB cable, the “FUJIFILM X Acquire” allows users to backup/restore camera settings to/from a file. With “FUJIFILM X Acquire” (ver.1.7 or newer), CUSTOM REGISTRATION/EDIT settings are also stored and read.