X-T4 Firmware update

Version: 2.01

Last Updated: 04.07.2023

Overview

Change in the number of frames that can be stored in a single folder
・The maximum number of frames that can be stored in a single folder will be changed from 9,999 to 999 with Ver.1.30 or later.

If you are using a macOS computer to process recorded files in the SDXC memory card, make sure to follow the procedure below before upgrading the firmware.
Follow the instructions in “II-2. If using an SDXC memory card with existing files or one that　has not been recently formatted:” in the article titled “Important notice for consumers processing FUJIFILM digital camera files using macOS” that was published on Feb. 2 in this web site and then format the SDXC memory card before using it.

Notes

Please read this update after refreshing this page.

In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the “Control” key and “F5” key.
In case of Mac (Safari / Google Chrome), hold down the “Command” key and “R” key.
In case of Mac (FireFox), hold down the “Command”, “Shift” and “R” keys at same time.

The firmware upgrade is not required if its version is latest.

Refer to “2) Firmware version checking procedure” in the “Detail of firmware update steps” below to check the firmware version.

Please use your camera and lens with the latest version of firmware.

If you don‘t use them with the latest version, you may not enjoy their full performance. Check the latest firmware version from the link below.

Firmware

Firmware update via the smartphone or a tablet.

The firmware of a camera paired with a smartphone can be updated via the smartphone and a tablet.

The method of firmware update via a smartphone

Settings you have changed can be saved by FUJIFILM X Acquire and so on.

We would recommend you save the settings if you have changed them from default ones. For detail, visit the FAQ website.

How to save and restore camera settings

Detail of the firmware update

Ver.2.01

The firmware update Ver.2.01 from Ver.2.00 incorporates the following issues:

The firmware bug is fixed that the camera freezes under the following shooting conditions after updating to Ver.2.00.

・ DRIVE DIAL: ADV
・ IMAGE QUALITY: “FINE + RAW” or “NORMAL + RAW”

Oher minor bugs are fixed.

Ver.2.00

The firmware update Ver.2.00 from Ver.1.72 incorporates the following issues:

Regarding the details of No.2, 3, 4, 5 and 6, download the “X-T4 New Features Guide［Ver.2.00]” from our website.

・X-T4 New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic

The firmware for each model supports new application software “FUJIFILM XApp” for GFX and X series cameras.

“FUJIFILM XApp” is the advanced application software for the current one, “FUJIFILM Camera Remote”, with which wireless communication becomes more stable and faster so that images and movies transportation from the camera becomes more smooth and comfortable with the smartphone and tablet terminal.
Moreover, the operation with the smartphone and tablet terminal becomes much simpler than the current application software, since all the data transportation operations, except for the “Bluetooth Pairing” between camera and the application software required at the first time only, are completed with the smartphone and tablet terminal.
Adding on the “Live View Mode” and access/download functions of the data in camera, several new functions are available, such as “Backup/Restore” to store the setting data in the shooting and setup menus, “Timeline” to review the shooting information of the camera/lens, shooting count/location, etc. and “Activity” to show the accumulated summary of the shooting count total, film simulation usage, etc., which should make GFX and X series cameras attractive more and more.

Note-1: Please see NEWS RELEASE for the details of “FUJIFILM XApp”.
Fujifilm releases the FUJIFILM XApp for the GFX / X Series of digital cameras

Note-2: “FUJIFILM XApp” works with iOS/iPad OS 13 or later and Android OS 11 or later.
Please download the “FUJIFILM XApp” from the following site by selecting the OS version of your smartphone / tablet terminal and the camera.

“FUJIFILM XApp” Download Site

Note-3: “FUJIFILM XApp” will be available as soon as it is ready.

“AREA SETTING” has been added in the “USER SETTING” of the Setup menu, which changed the operation procedure for the initial setting and “TIME DIFFERENCE” setting as follows.

・24 hours display can be selected in “DATE/TIME”.
・Your living location can be selected with the world map as well as “Saving time” can be on and off in “AREA SETTING”.
・“LOCAL” can also be selected with the world map in “TIME DIFFERENCE”.

Note-1: “ARIA SETTING” and “DATE/TIME” menus appear when turning on the camera right after firmware upgrade. So please set up the above items in these menus.

“RESET” function in the Setup menu will change.

・“AREA SETTING” has been added on the list that would not be reset in “SET-UP RESET” function.
・“INITIALIZE” function has been added to reset all settings to default values, other than except for custom white balance.

Some of the menu related to the wireless connection changed as follows.

・“Bluetooth SETTINGS” in “CONNECTION SETTING” of the Setup menu has been changed to “Bluetooth/SMARTPHONE SETTING” and “IMAGE TRANSFER WHILE POWER OFF” has been added in this menu.
・“AUTO IMAGE TRANSFER” has been changed to “AUTO IMAGE TRANSFER” and “SMARTPHONE SYNC. SETTIN” has been changed to “SMARTPHONE LOCATION SYNC” for each.

Some of the menu items of “GENERAL SETTINGS” in “CONNECTION SETTING” of the Setup menu has been change as follows.

・“NAME” and “RESIZE IMAGE FOR SMARTPHONEH 3M” has been moved into “Bluetooth/SMARTPHONE SETTING” menu.
・“GEOTAGGING” has been moved into “SAVE DATA SET-UP” menu.
・“LOCATION INFO” has been moved into “SCREEN SETUP” menu.
・“〔Wi-Fi〕 BUTTON SETTING” has been moved into “BUTTON/DIAL SETTING” menu and changed to “Fn1 BUTTON SETTING”.

“Bluetooth Pairing Registration” has been added in “FUNCTION (Fn) SETTING” while pushing and holding the DISP/BACK” button, which changed the procedure to connect to the smartphone.

FUJINON lens, XF8mmF3.5 R WR has been available.

Other minor bugs have been fixed.

Ver.1.72

Revised specification from Ver.1.71 to Ver.1.72

The firmware bug has been fixed, which caused that the focus cannot be adjusted by operating the Manual Focus Ring during movie recording when using the following lenses.

・FUJINON LENS XF14mm F2.8 R
・FUJINON LENS XF16mm F1.4 R WR
・FUJINON LENS XF23mm F1.4 R

Ver.1.71

Revised specification from Ver.1.70 to Ver.1.71

The firmware bugs have been fixed, which caused that the cameras rarely froze right after the completion of the firmware update with the current version using a smartphone (tablet) in which Camera Remote application software was installed.

Note:
When updating the firmware with the revised version, please be sure to update the firmware using an SD card according to steps below.
Detail of firmware update steps

Ver.1.70

Revised specification from Ver.1.60 to Ver.1.70

Please refer to the “X-T4 New Features Guide” for information on the following item No.1 that has been updated. For the “Tripod Grip (TG-BT1)” initial settings and operating instructions, please download the “Tripod Grip (TG-BT1) User’s Manual” from our website.

・Tripod Grip (TG-BT1) User’s Manual: English, Français, Deutch, Español, Italiano, 中文简, Arabic

“Tripod Grip (TG-BT1)” has been available.

When the camera and “Tripod Grip (TG-BT1)” are connected via Bluetooth, you can shoot still images and movies(*1) while holding the grip, as well as zoom in on lenses(*2) with an electric zoom function .

*1 Change the camera to movie mode, when shooting movies.
*2 The XC15-45mmF3.5-5.6 OIS PZ will be compatible in January 2023.

Other minor bugs have been fixed.

Ver.1.60

Revised specification from Ver.1.50 to Ver.1.60

Regarding the detail of the improvements, download the “X-T4 New Features Guide” from our website.

New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic

The following operational flow and functions of the zooming and focusing in the camera menu were added or changed.

・“TOUCH ZOOM” function was added in the “TOUCH SCREEN SETTING” menu, which is called through the operation flow below.
[ SETUP MENU ] ➔ [ BUTTON/DIAL SETTING ] ➔ [ TOUCH SCREEN SETTING ]

・“POWER ZOOM LENS FUNCTION(Fn) SETTING” menu to allocate the “Fn” button for the power zoom lens functions was added in “BUTTON/DIAL SETTING” menu, which is called through the operation flow below.
[ SETUP MENU ] ➔ [ BUTTON/DIAL SETTING ]
The functions added are “ZOOM/FOCUS CONTROL RING”, “CONSTAN SPEED ZOOM (T/W)” and “CONSTAN SPEED FOCUS (N/F)”.

・“LENS ZOOM/FOCUS SETTING” menu was added in “BUTTON/DIAL SETTING” menu, which is called through the operation flow below.
[ SETUP MENU ] ➔ [ BUTTON/DIAL SETTING ]
The functions added are “CONSTANT SPEED ZOOM (8 steps)”, “CONSTANT SPEED FOCUS (8 steps)”, “CONSTANT SPEED ZOOM/FOCUS (Fn) OPERATION”, “START/STOP SWITCH & ACTIVE WHILE PRESSING”, “ZOOM RING ROTATE” and “ZOOM/FOCUS CONTROL RING”.

・“FOCUS RING” and “FOCUS RING OPERATION” settings were moved to “LENS ZOOM/FOCUS SETTING” menu which is called through the operation flow below and the inscription of the “FOCUS RING” was changed to “ FOCUS RING ROTATE”.
[ SETUP MENU ] ➔ [ BUTTON/DIAL SETTING ] ➔ [ LENS ZOOM/FOCUS SETTING ]

Exposure adjustment function for the pre-view image/movie has been enhanced by optimizing the parameters for the exposure control when XF150-600mm is used.

“AF+MF” function has been available even at movie taking.

Ver.1.50

Revised specification from Ver.1.40 to Ver.1.50

FUJINON lens, XF150-600mmF5.6-8 R LM OIS WR has been available.

The accuracy of AF function has been improved at manual focus mode using "One-Push AF".

Ver.1.40

Revised specification from Ver.1.30 to Ver.1.40

Regarding the detail of the improvements, download the “X-T4 New Features Guide” from our website.

New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic

XLR microphone adapter* has been supported. As a result, [XLR MIC ADAPTER SETTING] option has been added under the [AUDIO SETTING] in the movie menu as well as [4ch AUDIO PLAYBACK] option has been added under [SOUND SETTING] in the setup menu.

＊TEAC TASCAM CA-XLR2d-F” XLR microphone adapters has been supported.

A firmware bug has been fixed, which caused that [WB SHIFT] saved as “CUSTOM” would be disabled by operating the “Q” menu.

Another minor bug has been fixed.

Ver.1.30

Revised specification from Ver.1.25 to Ver.1.30

The following specification has been revised to improve compatibility with SDXC memory card format.

The maximum number of frames that can be recorded in a single folder has been changed from 9,999 to 999.

Ver.1.25

The firmware update Ver.1.25 from Ver.1.23/1.24 incorporates the following issues:
The following problems have been fixed, which happened rarely in the field.

Bluetooth paired device is not registered correctly, or the camera does not turn on after paired device is registered.

The camera is frozen while [EYE SENSOR] is working.

Ver.1.23

The firmware update Ver.1.23 from Ver.1.22 incorporates the following issues:

The electronic level display will work in wider range of the tilt angle, so that you can use the electronic level on the LCD even if you tilt the camera more than that with the current firmware.

Minor bugs have been fixed.

Ver.1.22

The firmware update Ver.1.22 from Ver.1.21 incorporates the following issue:

The phenomenon is fixed that in some cases, a camera doesn’t turn on when the PAIRING REGISTRATION is available in SET UP MENU>CONNECTION SETTING>Bluetooth SETTINGS.

Ver.1.21

The firmware update Ver.1.21 from Ver.1.20 incorporates the following issues:

The phenomenon is fixed that the position of the spot metering is fixed on the center without reflecting the position of the focus area in case the focus mode is MF and the metering mode the spot.

The phenomenon is fixed that an image cannot be played back with a specified file name created by the EDIT FILE NAME function.

Fix of minor bugs.

Ver.1.20

The firmware update Ver.1.20 from Ver.1.10/1.11 incorporates the following issues:

Regarding the detail of the improvements, download the “X-T4 New Features Guide” from our website.

New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic

“AUTO POWER OFF TEMP.” option is added in the “POWER MANAGEMENT” menu.

* When the firmware is upgraded from ver.1.10 or Ver.1.11, “HIGH” mode in the POWER MANAGEMENT” menu is selected. We would recommend use of a tripod because the temperature of a part of a camera body can become hot although the shooting time becomes longer.
If you take a movie continuously on hand, we would recommend you set the “AUTO POWER OFF TEMP.” to “STANDARD” although the shooting time becomes shorter.
*Resetting the SETUP menu makes the “AUTO POWER OFF TEMP.” option changed to the “STANDARD” mode. If you want to take a movie longer, change the setting to the HIGH” mode.

Display of “IP ADDRESS” in Setup Menus > CONNECTION SETTING > INFORMATION is added.

Improvement of shutter speed setting for TTL slow sync flash shooting

In P and A mode, this firmware makes the slowest shutter speed slower than 1/8 sec. for the shooting used in a scene where relatively long exposure is required (ex. a flash shooting with night view background). In case the shutter speed setting is AUTO, the shutter speed becomes max. 4 sec in P mode and max. 30 sec. in A mode.

Fix of minor bugs.

Ver.1.10

The firmware update Ver.1.10 from Ver.1.03 incorporates the following issues:

Camera performance used with the XF50mmF1.0 R WR is optimized.

The phenomenon is fixed that in a multiple-flash shooting where the EF-X500 is used as a commander, flashes in some groups sometimes don’t fire correctly. Also in case the EF-X500 is used as a commander and the EF-60 as a remote flash, upgrade the camera firmware to the latest version.

Fix of minor bugs.

Ver.1.03

The firmware update Ver.1.03 from Ver.1.02 incorporates the following issue:

Fix of a minor bug during a movie shooting.

Ver.1.02

The firmware update Ver.1.02 from Ver.1.01 incorporates the following issues:

Improvement of BIS function during a movie shooting.

The phenomenon is fixed that images, which were erased from an SD card with SIMULTANEOUS DELETE ON, are played back.

The phenomenon is fixed that overexposure can happen in a certain shooting condition.

The phenomenon is fixed that a camera doesn’t wake up by pressing the shutter button after auto power off worked.

Fix of minor bugs

Ver.1.01

The firmware update Ver.1.01 from Ver.1.00 incorporates the following issues:

The phenomenon is fixed that the battery in the camera body cannot be charged by the bundled AC adapter when the USB POWER SUPPLY SETTING is changed to OFF from ON (default setting).

The phenomenon is fixed that repeated turning on and off a camera delays the set time.

Firmware Update Steps

Check the firmware version.
Prepare a formatted memory card.
Download the firmware and copy it to the card.
Put the memory card with the firmware in the camera and update it.

Detail of firmware update steps

Precaution

If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here*Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.

You can update the firmware from old version directly to the latest one.
Firmware updating requires approximately 5 minutes.(maximum)
Once the firmware has been updated, some data of the previous version cannot be restored.
Please check here if you encounter any problems.

Error messages and responses

Download

License Agreement

Please read this Agreement carefully before downloading this upgraded version software (“FIRMWARE”). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.

Article 1. License

FIRMWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you included with FUJI’s product(s) (“ORIGINAL FIRMWARE”). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 2. NO Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.

Article 3. Restrictions

You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.

I agree – Begin download

DownloadFile name: FWUP0024.DAT

Caution

*Make sure there isn’t any file with the same name in the destination of the firmware to save. If there is a file with the same name, the browser may automatically alter the name of the firmware like the name and (1). A camera will not recognize the firmware correctly with an altered name like that.

Firmware compatibility table

Please use your camera and lens with the latest version of firmware. If you don’t use them with the latest version, you may not enjoy their full performance. Check the compatibility table below.

Cameras Lenses