
X-H2 Firmware update
Version: 5.20
Last Updated: 27.02.2025
Overview
NOTES
Please read this update after refreshing this page.
- In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the āControlā key and āF5ā key.
- In case of Mac (Safari / Google Chrome), hold down the āCommandā key and āRā key.
- In case of Mac (FireFox), hold down the āCommandā, āShiftā and āRā keys at same time.
The firmware upgrade is not required if its version is latest.
- Refer to ā2) Firmware version checking procedureā in the āDetail of firmware update stepsā below to check the firmware version.
Please use your camera and lens with the latest version of firmware.
- If you donāt use them with the latest version, you may not enjoy their full performance. Check the latest firmware version from the link below.
Firmware update via the smartphone or a tablet.
- The firmware of a camera paired with a smartphone can be updated via the smartphone and a tablet.
The method of firmware update via a smartphone
Settings you have changed can be saved by FUJIFILM X Acquire and so on.
- We would recommend you save the settings if you have changed them from default ones. For detail, visit the FAQ website.
Detail of the firmware update
The firmware update Ver.5.20 from Ver.5.10/Ver.5.11 incorporates the following issues:
Regarding the details of No.2, download the āX-H2 New Features Guideļ¼»Ver.5.20]ā from our website.
ć»X-H2 New Features Guide:Ā English,Ā FranƧais,Ā Deutsch,Ā EspaƱol,Ā Italiano,Ā Nederland,Ā Polski,Ā Svenska,Ā Norsk,Ā Dansk,Ā PŃŃŃŠŗŠøŠ¹,Ā Suomi,Ā äøęē®,Ā äøęē¹é«,Ā ķźµģ“,Ā ąø ąø²ąø©ąø²ą¹ąøąø¢,Ā Arabic
-
Exposure tracking during aperture movement gets smoothed when used with the XF16-55mmF2.8 R LM WR II.
The above exposure tracking function is enabled under the following setting conditions.
[Setting conditions]
ć»StillMovie mode ā Movie
ć»Shooting Mode ā Manual (M) Mode
ć»ISO ā Fixed Sensitivity -
The āLINEARā setting in āFocus ring operationā menu can now be set by the focus ring rotating angle.
The above function is enabled when used with the following applicable lenses.
[Applicable lenses]
ć»XF/XC series Prime lenses and zoom lenses
Note:Interchangeable lenses with distance indicators (XF14mmF2.8 R, XF23mmF1.4 R and XF16mmF1.4 R WR) are not applicable. -
A firmware bug is fixed that the settings will not be renewed in āCUSTOM SETTINGā after camera is turned off and on when you save the following settings in āEDIT/SAVE CUSTOM SETTINGā,
[Settings]
ć»āISO SETTINGā
ć»Some of the āAUDIO SETTINGSā (ex. āMIC JACK SETTINGā, āINTERNAL MIC LEVEL ADJUSTMENTā, āEXTERNAL MIC LEVEL ADJUSTMENTā, etc.) -
A firmware bug is fixed that the camera does not turn on even if the power lever is on when a specific SD memory card is inserted.
-
A firmware bug is fixed that the āWRITE ERRORā occurs in rare cases after shooting when using specific SD memory cards.
-
A firmware bug is fixed that the camera freezes in rare cases during āCH HIGH SPEED BURSTā shooting under the following specific conditions.
[Settings]
ć»Shooting Mode ā CH HIGH SPEED BURST
ć»Shutter Type ā E-FRONT CURTAIN SHUTTER
ć»FLICKER REDUCTION ā ALL FRAMES -
Other minor bugs are also fixed.
The firmware update Ver.5.10 from Ver.5.00 incorporates the following issues:
Regarding the details of No.1 and No.2, download the āX-H2 New Features Guideļ¼»Ver.5.10]ā from our website.
ć»X-H2 New Features Guide:Ā English,Ā FranƧais,Ā Deutsch,Ā EspaƱol,Ā Italiano,Ā Nederland,Ā Polski,Ā Svenska,Ā Norsk,Ā Dansk,Ā PŃŃŃŠŗŠøŠ¹,Ā Suomi,Ā äøęē®,Ā äøęē¹é«,Ā ķźµģ“,Ā ąø ąø²ąø©ąø²ą¹ąøąø¢,Ā Arabic
-
āF-Log2 Cā has been added to the movie shooting menu.
You can get more wider color gamut using āF-Log2 Cā mode than using āF-Log2ā.
The expanded color gamut allows for the reproduction of high chroma colors that was difficult to reproduce with āF-Log2ā and expands the color editable range in ACES space and BT.709.Noteļ¼āF-Log2 C 3D-LUT fileā and āF-log2 C IDT fileā used for movie editing software, can be downloaded from the following download page.
Download page for āF-Log LUT file and IDT file -
āTIME CODE SYNC. SETTINGā can now be synchronized with the time code of USB devices.
This makes it easy to synchronize multiple movie clips at post-production during multi-camera shooting or separate audio recording. Moreover, āCONNECT TO ATOMOS AirGlu BTā in the Quick menu and function buttons assignment menu is changed to āTIME CODE SYNC.SETTINGā.
Noteļ¼In addition to the Bluetooth connection with āAtomos UltraSync Blueā, “TIME CODE SYNC” via USB-C connection with Ambient devices is now available.
-
The AF algorithm has been partially revised to improve focusing accuracy and subject tracking performance.
-
A firmware bug is fixed that some images get overexposed in rare cases when using āBurst Modeā.
-
A firmware bug is fixed that the camera freezes when canceling āPRE-SHOT ESā using āBurst Modeā.
-
A firmware bug is fixed that the camera freezes when the movie recording time reaches 5 hours, 35 minutes and 30 seconds at movie recording.
-
A firmware bug is fixed that the camera freezes in rare cases at still image shooting while holding down the AF-ON key when using āBurst Modeā.
The firmware update Ver.5.00 from Ver.4.00 incorporates the following issues:
Regarding the details of No.1 download the āX-H2 New Features Guideļ¼»Ver.5.00]ā from our website.
ć»X-H2 New Features Guide:Ā English,Ā FranƧais,Ā Deutsch,Ā EspaƱol,Ā Italiano,Ā Nederland,Ā Polski,Ā Svenska,Ā Norsk,Ā Dansk,Ā PŃŃŃŠŗŠøŠ¹,Ā Suomi,Ā äøęē®,Ā äøęē¹é«,Ā ķźµģ“,Ā ąø ąø²ąø©ąø²ą¹ąøąø¢,Ā Arabic
-
New mode for film simulation
A new “REALA ACE” mode is added that combines faithful color reproduction with crisp tonal gradations and is suitable for all kinds of subjects and situations.
-
The camera focuses on different subject in the face frame even though AF is detecting the pupil.
-
When the camera shake is large during movie recording under the following conditions, black edges will appear on the sides of the screen in rare cases.
ļ¼»Setting conditionsļ¼½
ć»MOVIE MODE: FHD 16:9
ć»IS MODE (MOVIE): IBIS/OIS+DIS -
When the shutter button is half-pressed at the same time as the āAF ILLUMINATORā light metering operation, the camera freezes in rare cases.
-
When the shutter release button is pressed all the way down without pressing it halfway under the following conditions, the camera freezes in rare cases.
ļ¼»Setting conditionsļ¼½
ć»SHOOTING MODE: CH HIGH SPEED BURST or CL LOW SPEED BURST
ć»SHUTTER TYPE:Ā MECHANICAL, E-FRONT CURTAIN, ELECTRONIC
ć»AF MODE: AF-S or AF-C
ć»AF/MF SETTING: RELEASE
ć»SHUTTER AF: OFF -
A minor bug.
The firmware update Ver.4.00 from Ver.3.10 incorporates the following issues:
Please refer to the āX-H2S New Features Guideā and āX-H2S Network and USB Settingsā for detailed descriptions.
ć»X-H2 New Features Guide:Ā English,Ā FranƧais,Ā Deutsch,Ā EspaƱol,Ā Italiano,Ā Nederland,Ā Polski,Ā Svenska,Ā Norsk,Ā Dansk,Ā PŃŃŃŠŗŠøŠ¹,Ā Suomi,Ā äøęē®,Ā äøęē¹é«,Ā ķźµģ“,Ā ąø ąø²ąø©ąø²ą¹ąøąø¢,Ā Arabic
ć»X-H2 Network and USB Setting:Ā English,Ā FranƧais,Ā Deutch,Ā EspaƱol,Ā Italiano,Ā Nederland,Ā Polski,Ā Svenska,Ā Norsk,Ā Dansk,Ā PŃŃŃŠŗŠøŠ¹,Ā Suomi,Ā äøęē®,Ā äøęē¹é«,Ā ķźµģ“,Ā ąø ąø²ąø©ąø²ą¹ąøąø¢,Ā Arabic
-
The following camera linkage features enhanced with FUJIFILM XApp, Ver.2.0.0 to Ver.2.1.0, are now supported.
Note:The following functions 1) and 2) are supported with FUJIFILM XApp Ver 2.0.0 or later 3) are with Ver.2.1.0 or later.
1)The following camera data, such as registration and operation information, are now displayed in the āEquipmentā tab with FUJIFILM XApp.
ļ¼»Camera data to be displayed in the āEquipmentā tab in the āFUJIFILM XAppāļ¼½
ć»Number of lifetime shots
ć»MECHANICAL SHUTTER
ć»BATTERY AGE
ć»Number of days since the last sensor cleaning
etc.2)Camera firmware upgrade process becomes easier.
The āFUJIFILM XAppā automatically downloads and transfer the revised firmware to the memory card in the camera in the background, so that you can upgrade the firmware anytime.Note-1:Background data transfer is performed while the camera and āFUJIFILM XAppā are connected via Wi-Fi.
Note-2:Once the revised firmware is automatically downloaded, the firmware update information is displayed on the LCD, prompting the operator to update to the latest firmware.
Note-3:It will work at next firmware update although the firmware is modified with this version.3)RAW image transfer to āFUJIFILM XAppā is now supported
Note:Be sure to update āFUJIFILM XAppā to the latest version (Ver.2.1.0 or later) in order to use these new features above.
-
AF performance is improved as follows.
1)In Focus Mode AF-C, AF tracking performance has been improved in scenes where the camera tends to lose focus.
2)A firmware bug is fixed that the AF focusing accuracy and distance indicator varied when using a wide-angle lens.
-
The following functions related to movie recording is implemented to improve usability at movie shooting.
1)A frame to indicate recording in progress is now displayed on the screen while recording the movie.
ć»MOVIE SETTINGļ¼REC FRAME INDICATOR2)The start and end sounds are now sounding during movie recording.
ć»SETUP MENUļ¼SOUND SETTINGļ¼REC START/STOP VOLUME3)āSELF-TIMERā is added to the āMOVIE SETTINGā, so that you can set the time from pressing the shutter release button to starting the movie recording.
ć»MOVIE SETTINGļ¼SELF-TIMER4)āWIDE/TRACKINGā function is added for focusing during movie recording. In case that the focus mode is set to AF-C, the camera automatically tracks the subject while touching the screen and in AF-S, the camera automatically selects the subject to focus on.
ć»AF/MF SETTINGļ¼AF MODEļ¼WIDE/TRACKING -
āFIRMWARE UPDATEā function is added to the setup menu.
Insert a memory card containing the new firmware into the camera and select [USER SETTING] in the [SET UP] menu to update the firmware.
The current procedure for firmware update can also continue to be used as follows.
ć»Start the camera while holding down the DISP/BACK button to update the firmware.
ć»Connect to a smartphone application to update firmware. -
āAUTO POWER OFF TEMP.ā setting screen is now displayed at initial setup, so that you can set the temperature (STANDARD/HIGH) to automatically turn off the power in case that the camera temperature rises.
Note:After updating to firmware version 4.00, a setup screen will appear.
-
Wi-Fi connection performance is improved, so that the usability for the communication functions becomes more comfortable, such as Frame.io.
-
Uploading still images and movies to the Frame.io platform is now available without the āFile Transmitter FT-XHā.
-
A firmware bug is fixed that the aperture value fluctuates while zooming at āBurstā mode with fixed aperture value.
-
A firmware bug is fixed that the exposure of the preview image and the recorded image are different from each other when shooting manually with the XF50mmF1.0 R WR, which has a bright aperture F value.
-
A firmware bug is fixed that the area settings in some regions are not automatically updated when connecting the camera to the āFUJIFILM XAppā to synchronize time.
-
A firmware bug is fixed that the noise reducing effects is emphasized too much when shooting 4K movie under the following setting conditions.
ć»Setting condition: āManual settingā and āDYNAMIC RANGEāļ¼200 to 400%
-
Other minor bugs are fixed.
The firmware update Ver.3.10 from Ver.3.03 incorporates the following issues:
Refer to āX-H2 New Features Guideā and āX-H2S Network and USB Settingā for operating instructions and explanations on the revised items described in the item No.1, No.2 and No.3 below.
ć»X-H2 New Features Guide:Ā English,Ā FranƧais,Ā Deutsch,Ā EspaƱol,Ā Italiano,Ā Nederland,Ā Polski,Ā Svenska,Ā Norsk,Ā Dansk,Ā PŃŃŃŠŗŠøŠ¹,Ā Suomi,Ā äøęē®,Ā äøęē¹é«,Ā ķźµģ“,Ā ąø ąø²ąø©ąø²ą¹ąøąø¢,Ā Arabic
ć»X-H2 Network and USB Setting:Ā English,Ā FranƧais,Ā Deutch,Ā EspaƱol,Ā Italiano,Ā Nederland,Ā Polski,Ā Svenska,Ā Norsk,Ā Dansk,Ā PŃŃŃŠŗŠøŠ¹,Ā Suomi,Ā äøęē®,Ā äøęē¹é«,Ā ķźµģ“,Ā ąø ąø²ąø©ąø²ą¹ąøąø¢,Ā Arabic
-
The āTIME CODE SYNC. SETTINGā option is added to “TIME CODE SETTING” in the movie mode to allow time code synchronization with external devices.
This allows connection to the ATOMOS AirGlu accessory, āUltraSync BLUEā via Bluetooth. In addition, timecode synchronization with multiple cameras (up to 6 cameras) is possible by acquiring timecode from āUltraSync BLUEā.
-
The connection procedure and display function at remote recording are improved when using File Transmitter FT-XH as follows.
(1)Connection setting gets easier to use the Remote Rec Function by reading the QR code displayed on the camera with the tabletās camera app to obtain the MAC address and IP address of the camera automatically.
(2)A āMULTIā button is added to the āRemote Rec Functionā menu. Pressing this button splits the screen display into four sections, allowing you to watch Live Views of multiple cameras simultaneously and pressing the āSINGLEā button bring back to the single screen display.
(3)A āClean display modeā is added to the āRemote Rec Functionā menu. When āClean display modeā is selected, only the Live View is displayed.Note:The firmware of the File Transmitter FT-XH must be upgraded to the latest version to enable those functions above. Be sure to update the cameraās firmware to the latest version before updating the firmware for the File Transmitter FT-XH.
-
The smartphone icon and Bluetooth icon are now displayed on the camera’s display screen when the camera and smartphone are connected via Bluetooth.
-
Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.
[Target interchangeable lens]
ć»XF16-55mmF2.8 R LM WRļ¼Ver.1.30 or laterNote:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.
-
Other minor bugs are fixed.
The firmware update Ver.3.03 from Ver.3.02 incorporates the following issues:
-
AF accuracy is improved with the following focus settings and shooting conditions.
ć»FOCUS MODEļ¼AF-S / AF-C
ć»AF MODEļ¼SINGLE POINT
ć»Lens usedļ¼Wide-angle lens
ć»Photography subjectļ¼High-frequency subjects such as animal hair, fine leaves, or low-contrast subjects. -
The firmware bug is fixed that the viewfinder (EVF) preview display will become monochromatic and freeze in rare cases under the following conditions.
ć»FOCUS MODEļ¼AF-C
ć»POWER MANAGEMENTļ¼PERFORMANCEļ¼BOOST
ć»POWER MANAGEMENTļ¼EVF/LCD BOOST SETTINGļ¼EVF FRAME RATE PRIORITY (120P) or (240P EQUIV.)
ć»āFUNCTION (Fn) SETTINGāļ¼āSUBJECT DETECTION ON/OFFā is allocated.
The firmware update Ver.3.02 from Ver.3.01 incorporates the following issue:
-
The firmware bug is fixed that the brightness of the subject rarely gets dark momentarily when shooting a movie with āMode Sā.
The firmware update Ver.3.01 from Ver.3.00 incorporates the following issue:
-
The firmware bug has been fixed that āWRITE ERRORā error appears in rare cases when images are saved to the slow data transfer speed memory card installed in the camera.
The firmware update Ver.3.00 from Ver.2.01 incorporates the following issues:
Regarding the details of No.2 download the āX-H2 New Features Guideļ¼»Ver.3.00]ā from our website.
ć»X-H2 New Features Guide: English, FranƧais, Deutsch, EspaƱol, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, PŃŃŃŠŗŠøŠ¹, Suomi, äøęē®, äøęē¹é«, ķźµģ“, ąø ąø²ąø©ąø²ą¹ąøąø¢, Arabic
-
The firmware for each model supports new application software āFUJIFILM XAppā for GFX and X series cameras.
āFUJIFILM XAppā is the advanced application software for the current one, āFUJIFILM Camera Remoteā, with which wireless communication becomes more stable and faster so that images and movies transportation from the camera becomes more smooth and comfortable with the smartphone and tablet terminal.
Moreover, the operation with the smartphone and tablet terminal becomes much simpler than the current application software, since all the data transportation operations, except for the āBluetooth Pairingā between camera and the application software required at the first time only, are completed with the smartphone and tablet terminal.
Adding on the āLive View Modeā and access/download functions of the data in camera, several new functions are available, such as āBackup/Restoreā to store the setting data in the shooting and setup menus, āTimelineā to review the shooting information of the camera/lens, shooting count/location, etc. and āActivityā to show the accumulated summary of the shooting count total, film simulation usage, etc., which should make GFX and X series cameras attractive more and more.Note-1: Please see NEWS RELEASE for the details of āFUJIFILM XAppā.
Fujifilm releases the FUJIFILM XApp for the GFX / X Series of digital camerasNote-2: āFUJIFILM XAppā works with iOS/iPad OS 13 or later and Android OS 11 or later.
Please download the āFUJIFILM XAppā from the following site by selecting the OS version of your smartphone / tablet terminal and the camera.āFUJIFILM XAppā Download Site
Note-3: āFUJIFILM XAppā will be available as soon as it is ready.
-
Some of the functions in the āCOMMAND DIAL SETTNGā has been changed.
ć»āFRONT COMMAND DIAL 1, 2, 3ā has been added.
ć»āISOā and āNONEā has been added as one of the selection items for āFRONT COMMAND DIAL 1, 2, 3ā and āREAR COMMAND DIALā.Note: Because of the above changes, the data allocated to āFRONT COMMAND DIALā and āREAR COMMAND DIALā will be back to the default values after upgrading the firmware. Please write down your setting data if you have modified them before upgrading.
-
Subject detection enhancement by AI (Artificial Intelligence).
(1) Current subject detection function improvement
Subject detection performance has been greatly improved in situations that were difficult to detect with the current firmware, such as ābacklightingā, ālooking sidewaysā, and āsmall subjectsā. The subject detection function can be used more than ever, regardless of the scene.
(2) New subject category added āInsectā and āDroneā detection is newly realized In addition to the existing āFaceā, āEyesā, āAnimalā, āBirdā, āAutomobileā, āMotorcycle & Bikeā, āAirplaneā and āTrainā. Insects can be detected by setting the subject as āBirdā and drones can be done by setting it as āAirplaneā. -
Dynamic tracking performance enhancement by the improved AF algorithm.
(1)The motion prediction algorithm has been improved to enable stable tracking of subjects moving at high speed in the frame.
(2)The AF focusing speed has been improved when continuous shooting is started by simultaneously pressing the AF-ON button and the release button while the camera is out of focus. The AF starts to focus at a faster rate than before, even in situations where the situation changes moment by moment, such as in sports. This makes it difficult to miss a shutter release opportunity, even in situations such as sports where the situation changes from moment to moment. -
FUJINON lens, XF8mmF3.5 R WR has been available.
-
The firmware bug has been fixed, which caused that camera froze when resetting the āIMAGE TRANSFER ORDERā while there was no image data in the memory card.
-
Other minor bugs have been fixed.
Revised specification from Ver.2.00 to Ver.2.01
-
The firmware bug has been fixed, which caused that the brightness of the preview image in the EVF was changing dramatically depending on the brightness of the subject while half pushing the shutter button by setting āFOCUS MODEā to āCONTINUOUS AFā.
Revised specification from Ver.1.21 to Ver.2.00
Refer to āX-H2 New Features Guideā and āX-H2 Network and USB Settingā for operating instructions and explanations on the revised items described in the item No.1 below.
ć»X-H2 New Features Guide: English, FranƧais, Deutsch, EspaƱol, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, PŃŃŃŠŗŠøŠ¹, Suomi, äøęē®, äøęē¹é«, ķźµģ“, ąø ąø²ąø©ąø²ą¹ąøąø¢, Arabic
ć»X-H2 Network and USB Setting: English, FranƧais, Deutch, EspaƱol, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, PŃŃŃŠŗŠøŠ¹, Suomi, äøęē®, äøęē¹é«, ķźµģ“, ąø ąø²ąø©ąø²ą¹ąøąø¢, Arabic
-
Connecting to āAdobe Camera to Cloudā has been available.
You can upload your still images and movies to the Frame.io platform directly through internet connection when you attach File Transmitter (FT-XH) with X-H2.
Since this function enables direct data transfer from the camera to the cloud at the shooting location, you can access and edit those still images and movies from anywhere, which will accelerate your photo and video production workflow by real time and remote editing.Note-1
FT-XH firmware must be updated with the latest one before using this function. Make sure to update FT-XH firmware after upgrading the firmware for the camera with the latest version
FT-XH firmware update Ver.2.00*Adobe Camera to Cloud and Frame.io are trademarks of Adobe Inc. registered in the U.S. and other countries.
-
The firmware bug has been fixed, which caused that the camera rarely freezes when shooting with flash under the following conditions.
ć»FLASH SETTING is TTL.
ć»FACE DETECTION is on and detecting plural faces.
ć»Exposure Compensation is set to around ā-2ā using ISO, APERTURE or SHUTTER SPEED settings. -
The firmware bug has been fixed, which caused that the camera rarely freezes when FOCUS LEVER is operated while shooting in “DIGITAL ZOOM: ON” mode.
-
Other minor bug has been fixed.
Revised specification from Ver.1.20 to Ver.1.21
-
The firmware bug has been fixed, which caused that the recorded image becomes abnormal when selecting āNOSTALGIC Neg.ā or āETERNA BLEACH BYPASSā as āFILM SIMULATIONā after changing the āWCā and āMGā settings of the āMONOCHROMATIC COLORā in the āIMAGE QUALITY SETTINGā menu.
-
Other minor bug has been fixed.
Revised specification from Ver.1.11 to Ver.1.20
Refer to the āX-H2 New Feature Guideā and āX-H2S Network and USB Settingā for the following items No.1, No.3 and No.4 that will be added and revised with new firmware (See the following links).
New Features Guide: English, FranƧais, Deutsch, EspaƱol, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, PŃŃŃŠŗŠøŠ¹, Suomi, äøęē®, äøęē¹é«, ķźµģ“, ąø ąø²ąø©ąø²ą¹ąøąø¢, Arabic
X-H2S Network and USB Setting: English, FranƧais, Deutch, EspaƱol, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, PŃŃŃŠŗŠøŠ¹, Suomi, äøęē®, äøęē¹é«, ķźµģ“, ąø ąø²ąø©ąø²ą¹ąøąø¢, Arabic
-
Tripod grip, āTG-BT1ā has been available.
When the camera and āTG-BT1ā are connected via Bluetooth, you can shoot still images and movies while holding the grip, as well as zoom in on lenses (*1) with an electric zoom function.
*1:Lenses with an electric zoom function (āPower Zoom Lensā)
ć»FUJINON LENS XF18-120mmF4 LM PZ WR (Ver.1.00 or later)
ć»FUJINON LENS XC15-45mmF3.5-5.6 OIS PZ (Ver.1.10or later)Note-1:
For the āTG-BT1ā initial settings and operating instructions, please download the āTripod Grip (TG-BT1) Userās Manualā from our website (See the link below).
ć»Tripod Grip (TG-BT1) Userās ManualNote-2:
Firmware update for the camera and lens is required to enable this function.Make sure to update the camera firmware to the latest firmware before updating the lens firmware.
ć»FUJINON LENS XC15-45mmF3.5-5.6 OIS PZ Firmware update Ver.1.10 -
File Transmitter (FT-XH), performance enhancement.
The live view frame rate from camera to terminal has been Improved when connecting the āFT-XHā.
Note-1:
Firmware update for the camera and āFT-XHā is required to enable this function.Make sure to update the camera firmware to the latest firmware before updating the āFT-XHā firmware.
ć»āFT-XHā Firmware update Ver.1.10 -
Menu title change.
(1)āIMAGE TRANSFER ORDERā has been renamed to āCOMMUNICATION STATUSā, which appeared through the following operation flow.
ć»[SCREEN SET-UP] ā [DISP. CUSTOM SETTING] ā [COMMUNICATION STATUS]
(2)āCOMMUNICATION STATUSā can now be used to toggle the image transfer order and connected device displays on or off simultaneously. -
āBluetooth DEVICE LISTā addition.
āBluetooth DEVICE LISTā has been added in the āBluetooth/SMARTPHONE SETTINGā in the āNETWORK/USB SETTINGā menu.
-
Other minor bug has been fixed.
Revised specification from Ver.1.10 to Ver.1.11
-
The firmware bug has been fixed, which caused that the color reproduction looks bad in the under-exposure area of the image when taking the photo under the following conditions.
[ Conditions ]
ć»FILM SIMULATIONļ¼āNOSTALGIC Neg.ā or āETERNA BLEACH BYPASSā
ć»LENS MODULATION OPTIMIZERļ¼ON
ć»SMOOTHS SKIN EFFECTļ¼āSTRONGā or āWEAKā
ć»LENS APERTUREļ¼F10 to F18
Revised specification from Ver.1.01 to Ver.1.10
-
Using āFile Transferā (FT-XH), the network tether shooting functions of āFUJIFILM Tether Shooting Plug-in/Plug-in PRO (Adobe Lightroom Classic)ā and āCapture Oneā will be available (See notes below).
Note-1:
The following versions of āFUJIFILM Tether Shooting Plug-in/Plug-in PROā will be required for the network tether shooting functions will be required.
ć»FUJIFILM Tether Shooting Plug-in/Plug-in PRO (Win) Ver.1.26
ć»FUJIFILM Tether Shooting Plug-in/Plug-in PRO (Mac) Ver.1.26Note-2:
Versions of āCapture Oneā that will be required for the network tether shooting functions is to be decided. We will also make an announcement as soon as they are released. -
The firmware bug has been fixed, which caused that the āRemote Rec Functionā was shut off while using the FT-XH.
-
The firmware bug has been fixed, which caused that the AF function did not work even if the shutter was half pressed in case that the focus was way off.
-
Another minor bug has been fixed.
Revised specification from Ver.1.00 to Ver.1.01
-
The bug has been fixed, which caused that camera sometimes stopped shooting when shutter button was half-pressed and hold after āBURSTā mode is used with the specific settings.
-
Performance at tethering mode was improved when FT-XH is used.
-
The bug has been fixed, which caused that the pre-view image got frozen for a few seconds when using the XF18-120mmF4 LM PZ WR lens and half-pressing the shutter button at āStand-byā for the movie taking.
-
Other minor bugs have been fixed.
Firmware Update Steps
- Check the firmware version.
- Prepare a formatted memory card.
- Download the firmware and copy it to the card.
- Put the memory card with the firmware in the camera and update it.
Precaution
If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here*Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
- You can update the firmware from old version directly to the latest one.
- Firmware updating requires approximately 5 minutes.(maximum)
- Once the firmware has been updated, some data of the previous version cannot be restored.
- Please check here if you encounter any problems.
Download
X-H2 License Agreement
Please read this Agreement carefully before downloading this upgraded version software (āFIRMWAREā). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.
Article 1. License
FIRMWARE is the upgraded version of software that FUJIFILM Corporation. (āFUJIā) already distributed to you included with FUJIās product(s) (āORIGINAL FIRMWAREā). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.
Article 2. NO Warranty
FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED āAS ISā WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
Article 3. Restrictions
You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.
Caution
*Make sure there isnāt any file with the same name in the destination of the firmware to save. If there is a file with the same name, the browser may automatically alter the name of the firmware like the name and (1). A camera will not recognize the firmware correctly with an altered name like that.
Firmware compatibility table
- Please use your camera and lens with the latest version of firmware. If you donāt use them with the latest version, you may not enjoy their full performance. Check the compatibility table below.