X100V Firmware update
Last Updated: 12.02.2021
Please read this update after refreshing this page.
- In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the “Control” key and “F5” key.
- In case of Mac (Safari / Google Chrome), hold down the “Command” key and “R” key.
- In case of Mac (FireFox), hold down the “Command”, “Shift” and “R” keys at same time.
The firmware upgrade is not required if its version is latest.
- Refer to “2) Firmware version checking procedure” in the “Detail of firmware update steps” below to check the firmware version.
Please use your camera and lens with the latest version of firmware.
- If you don’t use them with the latest version, you may not enjoy their full performance. Check the latest firmware version from the link below.
Detail of the firmware update
The firmware update Ver.2.02 from Ver.2.01 incorporates the following issues:
The following problems have been fixed, which happened rarely in the field.
Bluetooth paired device is not registered correctly, or the camera does not turn on after paired device is registered.
The camera is frozen while [EYE SENSOR] is working.
The firmware update Ver.2.01 from Ver.2.00 incorporates the following issues:
The electronic level display will work in wider range of the tilt angle, so that you can use the electronic level on the LCD even if you tilt the camera more than that with the current firmware.
Minor bugs have been fixed.
The firmware update Ver.2.00 from Ver.1.10 incorporates the following issues:
Regarding the details of the improvements, download the “X100V New Features Guide” from our website.
Support for FUJIFILM X Webcam.
This update adds compatibility with the FUJIFILM X Webcam (X Webcam) software, which allows the camera to be used as a high-quality webcam by installing X Webcam on a computer and connecting the camera to a computer via a USB cable.
Apply Film Simulations through X Webcam.
Apply Fujifilm’s one-of-a-kind Film Simulation modes to provide a personal touch to any web meeting or interaction.*1
*1 This upgrade does not provide the capability to make adjustments to camera settings from a tethered computer.
Use the built-in ND filter in the video mode.
The built-in ND filter can now also be used in video mode, while recording video, which will let image makers use wide apertures in bright light or slower shutter speeds.
Set the Position of the Bright Frame to its Shifted Location.
In optical viewfinder mode, the Bright Frame shifts to the actual shooting area when the shutter button is pressed halfway. This update adds an option to set the camera to remember the Bright Frame’s shifted location. Turning the setting to ON means the camera will not need to readjust the frame’s position every time focus is acquired.
1) When using the digital teleconverter function, you can save still images in RAW + JPEG to the memory card.
2) Ratings to images recorded in the [Jpeg + RAW] mode are applied to both Jpeg and RAW files.
3) SPOT METERING LOCK is added to the functions which can be alocated to the Function buttons.
4) Setting menu of the VIEWFINDER SELECTOR is changed in Setup Menus>BUTTON/DIAL SETTING>LOCK>FUNCTION SELECTION.
5) The phenomenon is fixed that in a multiple-flash shooting where the EF-X500 is used as a commander, flashes in some groups sometimes don’t fire correctly. Also in case the EF-X500 is used as a commander and the EF-60 as a remote flash, upgrade the camera firmware to the latest version.
Fix of minor bugs.
The firmware update Ver.1.10 from Ver.1.00 incorporates the following issues:
Addition of the “AUTO POWER OFF TEMP.” option in the “POWER MANAGEMENT” menu.
We would recommend use of the new option when the X100V is used in a continuous manner (such as with continuous video shooting) and so on and a user may feel the grip become noticeably hot.
For detail, visit our website to see the Owner’s Manual.
The Setup Menus (POWER MANAGEMENT)
*When the firmware is upgraded from ver.1.00, “HIGH” mode in the POWER MANAGEMENT” menu is selected which is the same function as the current one. We would recommend use of the “STANDARD” mode when the X100V is used hand-held in a continuous manner (such as with continuous video shooting) and so on.
In this case, the duration time of continuous shooting can be shorter than the current function.
*After this upgrade, the initial setting is as follows:
･Resetting the SETUP menu makes the “AUTO POWER OFF TEMP.” option changed to the “STANDARD” mode. If you want to take a movie longer, change the setting to the HIGH” mode.
･Resetting the shooting menu makes the movie mode changed to the “FHD 16:9”.
Fix of minor bug.
Firmware Update Steps
- Check the firmware version.
- Prepare a formatted memory card.
- Download the firmware and copy it to the card.
- Put the memory card with the firmware in the camera and update it.
If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here*Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
- You can update the firmware from old version directly to the latest one.
- Firmware updating requires approximately 5 minutes.(maximum)
- Once the firmware has been updated, some data of the previous version cannot be restored.
- Please check here if you encounter any problems.
Please read this Agreement carefully before downloading this upgraded version software (“FIRMWARE”). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.
Article 1. License
FIRMWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you included with FUJI’s product(s) (“ORIGINAL FIRMWARE”). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.
Article 2. NO Warranty
FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
Article 3. Restrictions
You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.
*Make sure there isn’t any file with the same name in the destination of the firmware to save. If there is a file with the same name, the browser may automatically alter the name of the firmware like the name and (1). A camera will not recognize the firmware correctly with an altered name like that.