X-T30 Firmware update
Last Updated: 01.19.2023
Please read this update after refreshing this page.
- In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the “Control” key and “F5” key.
- In case of Mac (Safari / Google Chrome), hold down the “Command” key and “R” key.
- In case of Mac (FireFox), hold down the “Command”, “Shift” and “R” keys at same time.
The firmware upgrade is not required if its version is latest.
- Refer to “2) Firmware version checking procedure” in the “Detail of firmware update steps” below to check the firmware version.
Please use your camera and lens with the latest version of firmware.
- If you don’t use them with the latest version, you may not enjoy their full performance. Check the latest firmware version from the link below.
Detail of the firmware update
Revised specification from Ver.1.50 to Ver.1.51
The firmware bugs have been fixed, which caused that the cameras rarely froze right after the completion of the firmware update with the current version using a smartphone (tablet) in which Camera Remote application software was installed.
When updating the firmware with the revised version, please be sure to update the firmware using an SD card according to steps below.
Detail of firmware update steps
Revised specification from Ver.1.41 to Ver.1.50
Please refer to the “X-T30 New Features Guide” for information on the following item No.1 that has been updated. For the “Tripod Grip (TG-BT1)” initial settings and operating instructions, please download the “Tripod Grip (TG-BT1) User’s Manual” from our website.
“Tripod Grip (TG-BT1)” has been available.
When the camera and “Tripod Grip (TG-BT1)” are connected via Bluetooth, you can shoot still images and movies(*) while holding the grip.
* Change the camera to movie mode, when shooting movies.
※ Zoom operation using the T/W button on the TG-BT1 is not supported.
Other minor bugs have been fixed.
The firmware update Ver.1.41 from Ver.1.40 incorporates the following issues:
The electronic level display will work in wider range of the tilt angle, so that you can use the electronic level on the LCD even if you tilt the camera more than that with the current firmware.
Minor bugs have been fixed.
The firmware update Ver.1.40 from Ver.1.30 incorporates the following issues:
Regarding the details of the improvements, download the “X-T30 New Features Guide” from our website.
Support for FUJIFILM X Webcam.
This update adds compatibility with the FUJIFILM X Webcam (X Webcam) software, which allows the camera to be used as a high-quality webcam by installing X Webcam on a computer and connecting the camera to a computer via a USB cable.
Apply Film Simulations through X Webcam.
Apply Fujifilm’s one-of-a-kind Film Simulation modes to provide a personal touch to any web meeting or interaction.*1
*1 This upgrade does not provide the capability to make adjustments to camera settings from a tethered computer.
Rating Information is Now Saved.
Rating information assigned in-camera, is now visible in third-party software to allow for enhanced catalog management.
Fix of minor bugs.
The firmware update Ver.1.30 from Ver.1.20 incorporates the following issues:
Camera performance used with the XF50mmF1.0 R WR is optimized.
The phenomenon is fixed that in a multiple-flash shooting where the EF-X500 is used as a commander, flashes in some groups sometimes don’t fire correctly. Also in case the EF-X500 is used as a commander and the EF-60 as a remote flash, upgrade the camera firmware to the latest version.
Fix of minor bugs.
The firmware update Ver.1.20 from Ver.1.10 incorporates the following issues:
Regarding the details of No.1, download the “X-T30 New Features Guide” from our website.
Gimbal / Drone support (*)
This firmware adds the following function to complement the current support for still image shooting via USB communications:
・Starting and ending video recording
・Adjusting exposure settings (exposure mode, shutter speed, aperture, ISO sensitivity, exposure compensation) for video recording
・Making manual focus adjustments for video recording
*This is the function via USB communication. About supported gimbals and drones, refer to support information not only on our website but also manufacturers’ websites.
*Improving the tracking performance of the eye AF frame, making it easier to attain accurate autofocus on the eyes.
*Improving face-detection performance when there are faces of different sizes within the same frame, making it easier to attain accurate autofocus.
*Improving autofocus capability on a foreground subject even when there is a mixture of foreground and background subjects within a AF frame, causing the foreground subject to go out of focus, e.g. when shooting flowers against a busy background.
Fix of minor bugs.
There is a wrong description in the firmware update information of Ver.1.20.
X-T30 doesn’t have the function of “Capability to save up to 9,999 pictures in each folder”.
We apologize for the wrong description and your inconvenience which may cause.
The firmware update Ver.1.10 from Ver.1.01 incorporates the following issues:
Improvement of Q (quick menu) button operability
To avoid accidentally pressing the Q (quick) menu, the button has changed to one of Fn(function) buttons. This will allow customers to disable the Q button function and also to allocate the Q (quick) menu to a different Fn button.
Fix of minor bugs
The firmware update Ver.1.01 from Ver.1.00 incorporates the following issue:
Improved operability of the Q (quick menu) button
To avoid accidentally opening the Q (quick) menu, the button reaction time has been increased.
*FUJIFILM Corporation plans an additional firmware update in June. This will allow customers to use the Q button as a Fn button. This planned update also allows the user to disable the Q button and adds it as a choice in the Function (Fn) Settings enabling the option to assign it to a different Fn button.
Firmware Update Steps
- Check the firmware version.
- Prepare a formatted memory card.
- Download the firmware and copy it to the card.
- Put the memory card with the firmware in the camera and update it.
If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here*Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
- You can update the firmware from old version directly to the latest one.
- Firmware updating requires approximately 5 minutes.(maximum)
- Once the firmware has been updated, some data of the previous version cannot be restored.
- Please check here if you encounter any problems.
Please read this Agreement carefully before downloading this upgraded version software (“FIRMWARE”). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.
Article 1. License
FIRMWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you included with FUJI’s product(s) (“ORIGINAL FIRMWARE”). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.
Article 2. NO Warranty
FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
Article 3. Restrictions
You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.
*Make sure there isn’t any file with the same name in the destination of the firmware to save. If there is a file with the same name, the browser may automatically alter the name of the firmware like the name and (1). A camera will not recognize the firmware correctly with an altered name like that.