X-T10 Firmware update

Version: 1.31

Last Updated: 2018.07.24

Overview

Notes

Please read this update after refreshing this page.

  • In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the “Control” key and “F5” key.
  • In case of Mac (Safari / Google Chrome), hold down the “Command” key and “R” key.
  • In case of Mac (FireFox), hold down the “Command”, “Shift” and “R” keys at same time.

The firmware upgrade is not required if its version is latest.

  • Refer to “2) Firmware version checking procedure” in the “Detail of firmware update steps” below to check the firmware version.

Please use your camera and lens with the latest version of firmware.

  • If you don’t use them with the latest version, you may not enjoy their full performance. Check the latest firmware version from the link below.

Firmware

Detail of the firmware update

Ver.1.31

The firmware update Ver.1.31 from Ver.1.30 incorporates the following issue:

The phenomenon is fixed that exposure control can work wrongly when aperture priority with M mount adaptor.

Ver.1.30

The firmware update Ver.1.30 from Ver.1.21 incorporates the following issue:

The compatibility is added with XF80mmF2.8 R LM OIS WR Macro.

The accuracy of AF function is improved when the lens is attached.

Ver.1.21

The firmware update Ver.1.21 from Ver.1.20 incorporates the following issues:

The accuracy of Manual focus adjustment will be enhanced when using lenses below.

XF35mmF2 R WR / XF90mmF2 R LM WR / XF10-24mmF4 R OIS / XF16-55mmF2.8 R LM WR /
XF18-55mmF2.8-4 R LM OIS / XF18-135mmF3.5-5.6 R LM OIS WR / XF50-140mmF2.8 R LM OIS WR /
XF55-200mmF3.5-4.8 R LM OIS / XF100-400mmF4.5-5.6 R LM OIS WR / XC16-50mmF3.5-5.6 OIS II /
XC50-230mmF4.5-6.7 OIS II

* It is necessary to upgrade the firmware of lenses above at the same time.
Camera Body / Lens Firmware Compatibility Table

Ver. 1.20

The firmware update Ver. 1.20 from Ver.1.10 incorporates the following issues:

Supports focus limiter function for XF100-400mmF4.5-5.6 R LM OIS WR.

To be fully compatible with the lens, the new firmware supports focus limiter function for FUJINON XF100-400mmF4.5-5.6 R LM OIS WR.

Improvement of the eye sensor's performance.

The phenomenon is fixed, that switching LCD display to EVF can be slow with some SD cards right after Power ON.

Ver. 1.10

The firmware update Ver. 1.10 from Ver. 1.01 incorporates the following issues:

Addition of compatibility with "XF35mmF2 R WR"

AF function will work more naturally and smoothly with “XF35mmF2 R WR”.

Addition of compatibility with Teleconverter "XF1.4X TC WR"

Function with the combination of “XF1.4X TC WR” and “XF50-140mmF2.8 R LM OIS WR” will be fully performed and values of aperture and focal length will be displayed correctly.

* Upgrade the firmware of a camera to the latest version first and then upgrade the firmware of your lens for Tele Conversion Lenses.
FUJINON XF Lens: XF50-140mmF2.8 R LM OIS WR Firmware Update Ver.1.10

Ver. 1.01

The firmware update Ver. 1.01 from Ver. 1.00 incorporates the following issues:

Improvement of "EYE DETECTION AF" speed when used with XF90mmF2 R LM WR

“EYE DETECTION AF” speed is improved when used with XF90mmF2 R LM WR in case that “FACE DETECTION” and “EYE DETECTION AF” are ON in “AUTO FOCUS SETTING” of the Shooting Menu.

Operational improvement of Fn1 Function button (Default setting : movie shooting)

The shortcut function to Fn1 BUTTON SETTING by pressing the button more than 2 sec. is removed. To avoid accidentally pressing the button when turning the Exposure compensation dial, pressing the button approx. 0.5sec. is required to start the function allocated to the button. This improvement is to avoid unexpected appearance of the SETTING when Fn1 function is needed.

<Note-1>
Functions of Fn2 through Fn7 button remain same.
<Note-2>
Steps to change the setting of Fn1 are same as usual like below.
・Change it in the function(Fn) setting menu appeared by pressing DISP/BACK button for a while.
・Change it through Setup Menu>BUTTON/DIAL SETTING>FUNCTION (Fn) SETTING.

Angle difference between jpeg image and jpeg image converted from RAW file

Currently, there is angle difference between jpeg image (including jpeg images converted in a camera) and jpeg image converted from RAW file by RAW FILE CONVERTER EX2.0 etc. The jpeg image angle converted from RAW file is a little bigger.
With this upgrade, the jpeg image angle is matched to one which is converted from RAW file. This symptom happens only when lenses below is used. In case of zoom lenses, this happen in wide-angle side.

・XC16-50mmF3.5-5.6 OIS
・XC16-50mmF3.5-5.6 OIS Ⅱ
・XF18-55mmF2.8-4 R LM OIS
・XF10-24mmF4 R OIS
・XF16-55mmF2.8 R LM WR
・XF18-135mmF3.5-5.6 R LM OIS WR
・XF18mmF2 R
・XF27mmF2.8

Support for Windows10

The phenomenon is fixed that images in a camera cannot be transferred to a Windows10 PC via a USB cable.

Firmware Update Steps

  1. Check the firmware version.
  2. Prepare a formatted memory card.
  3. Download the firmware and copy it to the card.
  4. Put the memory card with the firmware in the camera and update it.
Detail of firmware update steps

Precaution

If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here*Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.

  • You can update the firmware from old version directly to the latest one.
  • Firmware updating requires approximately 5 minutes.(maximum)
  • Once the firmware has been updated, some data of the previous version cannot be restored.
  • Please check here if you encounter any problems.

Error messages and responses

Download

License Agreement

Please read this Agreement carefully before downloading this upgraded version software (“FIRMWARE”). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.

Article 1. License

FIRMWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you included with FUJI’s product(s) (“ORIGINAL FIRMWARE”). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 2. NO Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.

Article 3. Restrictions

You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.

DownloadFile name: FWUP0007.DAT

Caution

*Make sure there isn’t any file with the same name in the destination of the firmware to save. If there is a file with the same name, the browser may automatically alter the name of the firmware like the name and (1). A camera will not recognize the firmware correctly with an altered name like that.

Firmware compatibility table

  • Please use your camera and lens with the latest version of firmware. If you don’t use them with the latest version, you may not enjoy their full performance. Check the compatibility table below.
CamerasLenses