X-S10 Compatibility Chart

Supported memory cards

Product Name (Model Number)CapacityCompatibility
SD memory card1GB – 2GB
SDHC memory card4GB – 32GB*1 *2 *3
SDXC memory card64GB – 2TB*1 *2 *3
* SanDisk cards are recommended.
*1 Compatible with UHS-I 4GB – 256GB
*2 Use a memory card with a class 10 write speed (10MB/s) or better when shooting HD movie.
*3 UHS with a class 3 write speed is recommended for 4K movie recording.

Recommended USB / HDMI cable

Product Name (Model Number)Specifications / OtherCompatibility
USB cableTerminal on the camera side: USB Type-C(USB3.1Gen1)
*must be 1.5m or less in length and data transferable.
HDMI cableTerminal on the camera side: Type D (HDMI micro)
*must be 1.5m or less in length.
* Learn more about the terminal types from the FAQ link below.
FAQ – USB cable
FAQ – HDMI cable

Operation confirmed mobile battery

BrandProduct Name (Model Number)Compatibility
AnkerPowerCore Speed 20000 PD
AnkerPowerCore+26800 PD
* Learn more about the operation confirmed mobile battery and its use from the FAQ link below.
FAQ – mobile battery

Operation confirmed gimbal

BrandProduct Name (Model Number)Compatibility
Guilin Zhishen Information Technology Co., Ltd (ZHIYUN)WEEBILL2✔ *1
*1 XF16-55mmF2.8 R LM WR , XF18-55mmF2.8-4 R LM OIS , XF18-135mmF3.5-5.6 R LM OIS WR , XF35mmF2 R WR、XF23mmF1.4 R , XF56mmF1.2 R , XC15-45mmF3.5-5.6 OIS PZ
Camera functions that can be controlled with WEEBILL2
“Start” and “Stop” control function for the camera recording by “Photo/Video Button” on WEEBILL2
“ISO sensitivity ” selecting function for the camera by “Control Wheel” on WEEBILL2
Camera settings
Please set the camera to “MOVIE MODE”.
Select the ISO sensitivity in the “FUNCTION SELECTION” menu that appears through the following operation.
After connecting the camera and gimbal with the USB cable, turn on the power of the camera and then the power of WEEBILL2.
Set the shutter speed and aperture prior to recording.
X-S10 with some lenses require “Lens Support” or “Camera Backing Base” to attach onto WEEBILL2.
You can not change Battery NP-W126S and memory cards while X-S10 is mounted on WEEBILL2.
If the ISO sensitivity cannot be changed with the “Control Wheel” on WEEBILL2 , change the setting from “ISO” to “Aperture” in the menu of the Gimbal and then set it back to “ISO”.