This website uses cookies. By using the site you are agreeing to our Privacy Policy.

Tethered Capture Plug-in for Adobe® Photoshop® Lightroom®

Windows Version: 1.13.0

Last Updated: 11.01.2018

Mac Version: 1.13.0

Last Updated: 11.01.2018

Overview

This software is to make an installer of Tether Capture Plug-in for Adobe® Photoshop® Lightroom® to cameras below.

* After May 31, 2019, Fujifilm will no longer provide camera compatibility upgrade or OS support for HS-V5 and related software including the Plug-in.
* To use “Tethered Capture Plug-in for Adobe® Photoshop® Lightroom®”, Windows PC installed with “Tethered Shooting Software HS-V5 for Windows®” is required.
* To use “Tethered Capture Plug-in for Adobe® Photoshop® Lightroom®” you need to purchase “Adobe® Photoshop® Lightroom® 5 or 6”.
* “Tethered Capture Plug-in for Adobe® Photoshop® Lightroom®” is compatible with cameras below. If your camera is old version of firmware upgrade it.

FUJIFILM GFX 50R: Ver.1.00 or later
FUJIFILM GFX 50S: Ver.1.00 or later
FUJIFILM X-H1: Ver.1.00 or later
FUJIFILM X-Pro2: Ver.4.00 or later
FUJIFILM X-T1: Ver.4.30 or later
FUJIFILM X-T2: Ver.1.10 or later
FUJIFILM X-T3: Ver.1.00 or later

* For customers who don’t have the HS-V5, “FUJIFILM Tether Shooting Plug-in” is available for purchase at Adobe Exchange site.

Notes

Please read this update after refreshing this page.

  • In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the “Control” key and “F5” key.
  • In case of Mac (Safari / Google Chrome), hold down the “Command” key and “R” key.
  • In case of Mac (FireFox), hold down the “Command”, “Shift” and “R” keys at same time.
  • Windows
  • Mac

Detail of the software update

Ver.1.13.0

The software update Ver.1.13.0 incorporates the following issues:

The compatibility of tethered shooting with "FUJIFILM GFX 50R" is added.

The additional function below can be used.
・Backup/restore of camera setting for tethered shooting.
・Tethered shooting via USB or Wi-Fi.

Compatibility with “macOS Mojave” is added.

If you use a Mac with “macOS Mojave”, install the latest version(1.13.0) of the ”Tethered Capture Plug-in for Adobe® Photoshop® Lightroom®”.

Ver.1.10

The software update Ver.1.10 from Ver.1.7 incorporates the following issue:

In case that the File Type (JPEG or RAW) to be transferred selected in the software is not selected in the IMAGE QUALITY menu in a camera, the message will appear on a PC screen.

For example, in case that only “JPEG” is selected in the software, but the IMAGE QUALITY “RAW” is selected is in the camera, the message of “No image is transferred. Check the IMAGE QUALITY menu settings of camera.” appears.

Ver.1.7

The software update Ver.1.7 from Ver.1.6 incorporates the following issues:

The compatibility of tethered shooting with "FUJIFILM X-H1" is added.

The additional function below can be used.
・Backup/restore of camera setting for tethered shooting.
・Tethered shooting via USB or Wi-Fi.

Compatibility with new functions of X-Pro2 (firmware version 4.00) is added, which are tether shooting via USB or Wi-Fi and backup/restore of camera settings.

*To use the new functions, upgrade the firmware of X-Pro2 to ver.4.00.

X-Pro2 Camera Body Firmware Update

Ver.1.6

The software update Ver.1.6 incorporates the following issues:

Tether shooting is available by wireless communication for GFX 50S and X-T2

*This function can be used with GFX 50S ver. 1.10 or newer and X-T2 ver.2.10 or newer. If the firmware version of a camera is older than that, firmware upgrade is required.

For detail, visit the URL below.

GFX 50S Camera Body Firmware Update
X-T2 Camera Body Firmware Update

* To use the Tether shooting by wireless communication, an additional setting is required. For detail of the setting, refer to the setting manual

How to set:

Ver.1.4

The software update Ver.1.4 incorporates the following issues:

The compatibility of tethered shooting with "FUJIFILM GFX 50S" is added.

Ver.1.3

FUJIFILM X-T2 (firmware version 1.10 or later) is supported in USB tether shooting function.
* Before connecting X-T2 to the PC, set “PC SHOOT MODE” of “CONNECTION SETTING” in SETUP menu to “USB AUTO”.

It has become compatible with macOS Sierra.

Ver.1.2

The software update Ver.1.2 incorporates the following issues:

Storage of image data both to PC and SD card on PC shooting.

Image data can be stored both to PC and SD card in a camera connected to PC on every PC shooting. And it is possible to choose the destination to store (PC or SD card) for each of JPEG data and RAW data in case “IMAGE QUALITY” is set to “FINE+RAW” or “NORMAL+RAW”.
[How to set]
Choice of the destination becomes available by clicking an “X” icon on the menu bar of MacOSX or on the task tray of Windows. (See the images below.)

*The firmware of FUJIFILM X-T1 needs to be upgraded to version 4.30 or later.

X-T1 Camera Body Firmware Update

White Balance setting of the camera can be indicated.

How to Install

  1. Use a Windows PC installed with “Tethered Shooting Software HS-V5 for Windows®
  2. Download exe file from this page.
  3. Double-click the downloaded exe file to run the automatic decompression software. Follow the on-screen instructions.
  4. The decompressed “Tethered Capture Plug-in for Adobe® Photoshop® Lightroom®” of Windows and Mac OS will be saved on your desktop with the following filenames:
    Windows : “FUJI_PLUGIN.EXE”
    Mac : “FUJI_PLUGIN.pkg”
  5. To install the plugin, double-click the version that applies to the OS of your computer and follow the instructions.

*When installing “Tethered Capture Plug-in for Adobe® Photoshop® Lightroom®” Ver.1.10 to a Mac OS PC, please copy the installer “FUJI_PLUGIN.pkg” to the Mac PC beforehand. Double-click it and follow the on-screen instructions.

System Requirements

Applicable OS is based on each OS of Adobe® Photoshop® Lightroom®.

Download

License Agreement

Please read this Agreement carefully before downloading this upgraded version software (“SOFTWARE”). By downloading SOFTWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download SOFTWARE.

Article 1. License

SOFTWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you bundled with FUJI’s product(s) (“ORIGINAL SOFTWARE”). FUJI grants you a non-exclusive license to use SOFTWARE, provided that you have been granted by FUJI a valid license to use ORIGINAL SOFTWARE. Except as set forth herein, SOFTWARE is licensed to you subject to the terms of the license agreement as to ORIGINAL SOFTWARE. All copyrights and other proprietary rights to SOFTWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 2. NO Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.

DownloadFile name: LRPLUGIN1130.exe
  • Windows
  • Mac

Detail of the software update

Ver.1.13.0

The software update Ver.1.13.0 incorporates the following issues:

The compatibility of tethered shooting with "FUJIFILM GFX 50R" is added.

The additional function below can be used.
・Backup/restore of camera setting for tethered shooting.
・Tethered shooting via USB or Wi-Fi.

Compatibility with “macOS Mojave” is added.

If you use a PC with “macOS Mojave”, install the latest version(1.13.0) of the ”Tethered Capture Plug-in for Adobe® Photoshop® Lightroom®”.

Ver.1.10

The software update Ver.1.10 from Ver.1.7 incorporates the following issue:

In case that the File Type (JPEG or RAW) to be transferred selected in the software is not selected in the IMAGE QUALITY menu in a camera, the message will appear on a PC screen.

For example, in case that only “JPEG” is selected in the software, but the IMAGE QUALITY “RAW” is selected is in the camera, the message of “No image is transferred. Check the IMAGE QUALITY menu settings of camera.” appears.

Ver.1.7

The software update Ver.1.7 from Ver.1.6 incorporates the following issues:

The compatibility of tethered shooting with "FUJIFILM X-H1" is added.

The additional function below can be used.
・Backup/restore of camera setting for tethered shooting.
・Tethered shooting via USB or Wi-Fi.

Compatibility with new functions of X-Pro2 (firmware version 4.00) is added, which are tether shooting via USB or Wi-Fi and backup/restore of camera settings.

*To use the new functions, upgrade the firmware of X-Pro2 to ver.4.00.

X-Pro2 Camera Body Firmware Update

Ver.1.6

The software update Ver.1.6 incorporates the following issues:

Tether shooting is available by wireless communication for GFX 50S and X-T2

*This function can be used with GFX 50S ver. 1.10 or newer and X-T2 ver.2.10 or newer. If the firmware version of a camera is older than that, firmware upgrade is required.

For detail, visit the URL below.

GFX 50S Camera Body Firmware Update
X-T2 Camera Body Firmware Update

* To use the Tether shooting by wireless communication, an additional setting is required. For detail of the setting, refer to the setting manual

How to set on GFX 50: English, Other

How to set on X-T2: English, Other

Ver.1.4

The software update Ver.1.4 incorporates the following issues:

The compatibility of tethered shooting with "FUJIFILM GFX 50S" is added.

Ver.1.3

FUJIFILM X-T2 (firmware version 1.10 or later) is supported in USB tether shooting function.
* Before connecting X-T2 to the PC, set “PC SHOOT MODE” of “CONNECTION SETTING” in SETUP menu to “USB AUTO”.

It has become compatible with macOS Sierra.

Ver.1.2

The software update Ver.1.2 incorporates the following issues:

Storage of image data both to PC and SD card on PC shooting.

Image data can be stored both to PC and SD card in a camera connected to PC on every PC shooting. And it is possible to choose the destination to store (PC or SD card) for each of JPEG data and RAW data in case “IMAGE QUALITY” is set to “FINE+RAW” or “NORMAL+RAW”.
[How to set]
Choice of the destination becomes available by clicking an “X” icon on the menu bar of MacOSX or on the task tray of Windows. (See the images below.)

*The firmware of FUJIFILM X-T1 needs to be upgraded to version 4.30 or later.

X-T1 Camera Body Firmware Update

White Balance setting of the camera can be indicated.

How to Install

  1. Use a Windows PC installed with “Tethered Shooting Software HS-V5 for Windows®
  2. Download exe file from this page.
  3. Double-click the downloaded exe file to run the automatic decompression software. Follow the on-screen instructions.
  4. The decompressed “Tethered Capture Plug-in for Adobe® Photoshop® Lightroom®” of Windows and Mac OS will be saved on your desktop with the following filenames:
    Windows : “FUJI_PLUGIN.EXE”
    Mac : “FUJI_PLUGIN.pkg”
  5. To install the plugin, double-click the version that applies to the OS of your computer and follow the instructions.

*When installing “Tethered Capture Plug-in for Adobe® Photoshop® Lightroom®” Ver.1.10 to a Mac OS PC, please copy the installer “FUJI_PLUGIN.pkg” to the Mac PC beforehand. Double-click it and follow the on-screen instructions.

System Requirements

Applicable OS is based on each OS of Adobe® Photoshop® Lightroom®.

Download

License Agreement

Please read this Agreement carefully before downloading this upgraded version software (“SOFTWARE”). By downloading SOFTWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download SOFTWARE.

Article 1. License

SOFTWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you bundled with FUJI’s product(s) (“ORIGINAL SOFTWARE”). FUJI grants you a non-exclusive license to use SOFTWARE, provided that you have been granted by FUJI a valid license to use ORIGINAL SOFTWARE. Except as set forth herein, SOFTWARE is licensed to you subject to the terms of the license agreement as to ORIGINAL SOFTWARE. All copyrights and other proprietary rights to SOFTWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 2. NO Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.

DownloadFile name: LRPLUGIN1130.exe