X-T3 Firmware update
Last Updated: 09.17.2020
Please read this update after refreshing this page.
- In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the “Control” key and “F5” key.
- In case of Mac (Safari / Google Chrome), hold down the “Command” key and “R” key.
- In case of Mac (FireFox), hold down the “Command”, “Shift” and “R” keys at same time.
The firmware upgrade is not required if its version is latest.
- Refer to “2) Firmware version checking procedure” in the “Detail of firmware update steps” below to check the firmware version.
Please use your camera and lens with the latest version of firmware.
- If you don‘t use them with the latest version, you may not enjoy their full performance. Check the latest firmware version from the link below.
Firmware update via the smartphone or a tablet.
- The firmware of a camera paired with a smartphone can be updated via the smartphone and a tablet.
Settings you have changed can be saved by FUJIFILM X Acquire and so on.
- We would recommend you save the settings if you have changed them from default ones. For detail, visit the FAQ website.
Detail of the firmware update
The firmware update Ver.3.30 from Ver.3.21 incorporates the following issues:
Camera performance used with the XF50mmF1.0 R WR is optimized.
The phenomenon is fixed that in a multiple-flash shooting where the EF-X500 is used as a commander, flashes in some groups sometimes don’t fire correctly. Also in case the EF-X500 is used as a commander and the EF-60 as a remote flash, upgrade the camera firmware to the latest version.
Fix of minor bugs.
The firmware update Ver.3.21 from Ver.3.20 incorporates the following:
Fix of minor bugs.
The firmware update Ver.3.20 from Ver.3.10 incorporates the following:
*Improving the tracking performance of the eye AF frame, making it easier to attain accurate autofocus on the eyes.
*Improving face-detection performance when there are faces of different sizes within the same frame, making it easier to attain accurate autofocus.
*Improving autofocus capability on a foreground subject even when there is a mixture of foreground and background subjects within a AF frame, causing the foreground subject to go out of focus, e.g. when shooting flowers against a busy background.
Capability to save up to 9,999 pictures in each folder.
Until now, the number of pictures that can be saved in a folder on an SD card was limited to 999. This update will raise the limit by ten times to 9,999 pictures.
The phenomena below during a movie shooting are fixed.
*Focus hunting at the minimum aperture.
*A black line can sometimes appear on the bottom of the center.
Fix of minor bugs.
The firmware update Ver.3.10 from Ver.3.01 incorporates the following issues:
Regarding the details of No.1, download the “X-T3 New Features Guide” from our website.
Gimbal / Drone support (*)
This firmware adds the following function to complement the current support for still image shooting via USB communications:
・Starting and ending video recording
・Adjusting exposure settings (exposure mode, shutter speed, aperture, ISO sensitivity, exposure compensation) for video recording
・Making manual focus adjustments for video recording
*This is the function via USB communication. About supported gimbals and drones, refer to support information not only on our website but also manufacturers’ websites.
Fix of minor bugs.
The firmware update Ver.3.01 from Ver.3.00 incorporates the following issue:
The phenomenon is fixed that in rare cases, the message of “TURN OFF THE CAMERA AND TURN ON AGAIN” can appear in the drive mode of “S” when you repeatedly and rapidly take photos in a short time.
The firmware update Ver.3.00 from Ver.2.10 incorporates the following issues:
Regarding the details of No.2,4 and 8 download the “X-T3 New Features Guide” from our website.
Strengthened the accuracy of face / eye detection AF performance
The AF algorithm has been improved along with the accuracy of face / eye detection AF. The ability to detect faces in the distance has been enhanced by approximately 30% and AF tracking is now more stable, even when an obstacle appears in the way. The improvements in AF are applicable to both still photos and video recording.
New Face Select function
The Face Select function has been introduced to provide priority auto-focus, tracking and exposure on a selected subject when multiple faces have been detected. The priority face can be selected by using the touch screen or focus lever.
Faster AF speed for subjects at a distance
A Double Tap Setting and Touch Function has been added to the touch screen settings*. The two settings must be set to OFF to provide a better touch screen response. These new settings allow a more intuitive touch operation when shooting, AF and focus area select.
Intuitive operation of touch screen
A Double Tap Setting and Touch Function has been added to the touch screen settings(*1). The two settings must be set to OFF to provide a better touch screen response. These new settings allow a more intuitive touch operation when shooting, AF and focus area select.
*1：By default, Touch Screen Setting, Double Tap Setting and Touch Function are set to all OFF. Touch Screen Setting must be set to ON to use the touch screen function.
Focus frame when EYE DETECTION SETTING
When using EYE DETECTION SETTING, only focus frame on eye is displayed.
Improvement of AF/AE area tracking when using EVF
When using the EVF, tracking function for AF/AE area movement by touch screen is improved.
Push function of the Focus stick when INTERVAL TIMER SHOOTING
The push function is disabled when INTERVAL TIMER SHOOTING.
FLICKER REDUCTION function
The options are changed from ON/OFF to ALL FRAMES/FIRST FRAME/OFF. And when choosing FIRST FRAME, the speed of CH continuous shooting is improved.
Message when IMAGE TRANSFER ORDER
If there is no image of TRANSFER ORDER when turning on a camera, no message appears.
Fix of slight defects.
The firmware update Ver.2.10 from Ver.2.00 incorporates the following issues:
Regarding the details of No.1 download the “X-T3 New Features Guide” from our website.
Recording over 4GB movie file as one file
Movie files are no longer split when the file reaches 4GB file size. The file is recorded as one file providing an SD memory card greater than 32GB is used (excludes 32GB) (*1).
*1：By using SD memory cards less than or equal to 32GB, movie recording will continue without interruption when the file size reaches 4GB, however subsequent footage will be recorded to a separate file.
Note：Format SD memory cards before first use, and be sure to reformat all memory cards after using them in a computer or other device.
Fix of slight defects.
The firmware update Ver.2.00 from Ver.1.02 incorporates the following issues:
Regarding the details of No.1,3 and 6 download the “X-T3 New Features Guide” from our website.
4K HDR video recording in Hybrid Log Gamma (HLG)
Supports 4K HDR video recording in the Hybrid Log Gamma (HLG), one of the formats defined in the ITU-R BT.2100 international standards (*1). It allows the capture of rich and realistic images in a scene where there is a huge gap between highlight and shadow, or subjects with high color saturation.
*1：Only compatible with H.265(HEVC). Please enjoy with television or display compatible with HLG formats.
Simultaneous output of Film Simulation and F-Log footage (*2)
Supports simultaneous output of Film Simulation and F-Log footage. It allows you to record in F-Log while checking Film Simulation image on an external monitor.
*2：Not compatible with 59.94P/50P, FHD high speed rec., 4K interframe NR, and HDMI output info display mode. Also, cannot choose different image size (4K/FHD) for HDMI output and internal SD card recording.
Display color temperature (Kelvin) on EVF/LCD
Color temperature (Kelvin) can be displayed on EVF/LCD.
Supports slower shutter speeds with DCI4K/4K
29.97P/25P/24P/23.98P (*4) Slower shutter speeds than the framerate can be selected with 4K 29.97P/25P/24P/23.98P. *4：Cannot select slower shutter speed than framerate with DCI/4K 59.94P/50P or DCI4K/4K/FHD Long GOP recording. For detail, refer to the Shutter Speed in the “Movie Recording Mode” list.
Compatible with ALL-Intra and maximum bitrate 400Mbps with H.264
Using H.264 compression, you will now to be able to select ALL-Intra at a maximum bitrate of 400Mbps.
Display power supply icon
Power supply icon is displayed on EVF/LCD while using AC adapter (AC-9VS), or Anker PowerCore+ 26800 PD (*5) and Anker PowerCore Speed 20000 PD (*6).
*5：Anker and PowerCore are trademark or registered trademark of Anker Innovations Limited or associated companies.
*6：Product may not be available on your country.
Fix of slight defects.
The firmware update Ver.1.02 from Ver.1.01 incorporates the following issues:
The phenomenon is fixed that in rare cases, the buttons cannot be used while using histogram display or sports finder.
The phenomenon is fixed that in rare cases, RAW image cannot be recorded normally under a certain conditions (Sports finder mode, continuous shooting with electronic shutter and so on)
Fix of slight defects.
The firmware update Ver.1.01 from Ver.1.00 incorporates the following issues:
Compensation of distortion is optimized in CH shooting with electronic shutter.
The phenomenon is fixed that the mechanical LOCK of some SD cards is not recognized.
Fix of other slight defects
Firmware Update Steps
- Check the firmware version.
- Prepare a formatted memory card.
- Download the firmware and copy it to the card.
- Put the memory card with the firmware in the camera and update it.
If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here*Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
- You can update the firmware from old version directly to the latest one.
- Firmware updating requires approximately 90 seconds.
- Once the firmware has been updated, some data of the previous version cannot be restored.
- Please check here if you encounter any problems.
Please read this Agreement carefully before downloading this upgraded version software (“FIRMWARE”). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.
Article 1. License
FIRMWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you included with FUJI’s product(s) (“ORIGINAL FIRMWARE”). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.
Article 2. NO Warranty
FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
Article 3. Restrictions
You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.
*Make sure there isn’t any file with the same name in the destination of the firmware to save. If there is a file with the same name, the browser may automatically alter the name of the firmware like the name and (1). A camera will not recognize the firmware correctly with an altered name like that.
- 09.17.2020Fujifilm releases X Webcam Software Ver 2.0
- 09.17.2020Free firmware update for FUJINON XF50mmF1.0 R WR Lens
- 09.17.2020X-T3 Firmware Update Ver.3.30
- 07.09.2020FUJIFILM X Webcam software now also available for macOS
- 05.27.2020Fujifilm launches a new solution for turning X Series and GFX System cameras into webcams