XF16-55mmF2.8 R LM WR Firmware update

Version: 1.32

Last Updated: 20.02.2024

Overview

<Updated: Feb. 20, 2024>
Permanent fix firmware Ver. 1.32 for a problem that occurred with the Ver. 1.30 firmware update is now available.

<Updated: Feb. 5, 2024>
 Emergency countermeasure firmware ”Ver.1.31” is now available.

<Updated: Feb. 1, 2024>
In Ver. 1.30 released on January 22, 2024, it was confirmed that the exposure of images taken with certain focal length and aperture value combinations became abnormal.

For this reason, the firmware download has been suspended.
We are preparing an emergency firmware for customers who have updated to Ver. 1.30, so please wait for it.

Notes

Please read this update after refreshing this page.

  • In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the “Control” key and “F5” key.
  • In case of Mac (Safari / Google Chrome), hold down the “Command” key and “R” key.
  • In case of Mac (FireFox), hold down the “Command”, “Shift” and “R” keys at same time.

The firmware upgrade is not required if its version is latest.

  • Refer to “2) Firmware version checking procedure” in the “Detail of firmware update steps” below to check the firmware version.

Please use your camera and lens with the latest version of firmware.

  • If you don’t use them with the latest version, you may not enjoy their full performance. Check the latest firmware version from the link below.

Firmware

Detail of the firmware update

Ver.1.32

The firmware update Ver.1.32 from Ver.1.31 incorporates the following issue:

The following bugs that were confirmed with the Ver. 1.30 firmware update have been fixed.

The bug was that the image taken becomes abnormal exposure depending on the combination of the focal length and aperture value.

Note: “Improved exposure tracking during zoom operation” that was implemented with Ver. 1.30 is also included with this revised version. Make sure to update the camera’s firmware to the latest version to enable this improvement.

[Applicable cameras]
X-H2S (Ver.5.10 or later), X-H2 (Ver.3.10 or later), X-T5 (Ver.2.10 or later), X-T4 (Ver.2.10 or later), X-T3 (Ver.5.10 or later), X-S20 (Ver.1.20 or later) and X-S10 (Ver.3.10 or later)

Ver.1.31

The firmware update Ver.1.31 from Ver.1.30 incorporates the following issue:

We have found some malfunctions (Phenomenon in which the exposure of a captured image becomes abnormal in combination with a certain focal length and aperture value) in the firmware Ver. 1.30 released on 22 Jan 2024.
Customers who have updated to Ver.1.30 should update to Ver.1.31.
If you update to Ver.1.31, the functions will be the same as Ver.1.20 and the following functions (*) added in Ver.1.30 will no longer be available.
* Improved exposure tracking during zoom operation.

Ver.1.30

The firmware update Ver.1.30 from Ver.1.20 incorporates the following issue:

Exposure tracking during zoom operation is improved when using the following cameras.

[Applicable cameras]
X-H2S (Ver.5.10 or later), X-H2 (Ver.3.10 or later), X-T5 (Ver.2.10 or later), X-T4 (Ver.2.10 or later), X-T3 (Ver.5.10 or later), X-S20 (Ver.1.20 or later) and X-S10 (Ver.3.10 or later)

Note:Make sure to update the camera’s firmware to the latest version before updating the firmware of the interchangeable lens to enable those functions above.

Ver.1.20

The firmware update Ver.1.20 from Ver.1.12 incorporates the following issues:

Aperture control parameters have been optimized to improve exposure tracking during movie taking.

Focusing motor noise variation during movie taking has been stabilized.

Focus tracking at zooming operation has been improved during movie taking.

Note
This enhancement No.3 requires the following cameras with latest firmware versions. Please make sure to upgrade camera firmware to the latest version before upgrading the lens firmware.
Link to the camera list

Required cameras:
X-H2S (Ver.1.00 or later), X-H2 (Ver.1.00 or later), X-T5 (Ver.1.00 or later), X-T4 (Ver.1.60 or later), X-T3 (Ver.4.40 or later), X-S10 (Ver.2.50 or later)

Ver.1.12

The firmware update Ver.1.12 from Ver.1.11 incorporates the following issues:

Improvement of tracking function of parallax correction in the OVF

The tracking function of parallax correction in the OVF is improved.
*Upgrade the firmware of X-Pro1 and X-Pro2 before the firmware of the lenses is upgraded.

Camera Body Firmware Compatibility Table

Improvement of the chromatic aberration compensation

Chromatic aberration compensation in wide-angle area is improved.

Ver.1.11

The firmware update Ver.1.11 from Ver.1.10 incorporates the following issue:

The firmware Ver.1.11 resolves the issue which may result in a failure if the upgrade is conducted with a camera whose firmware is the previous version.

Ver.1.10

The firmware update Ver.1.10 from Ver.1.00 incorporates the following issue:

The accuracy of Manual focus adjustment will be enhanced when using one with cameras below.

X-E1 / X-E2 / X-E2S / X-Pro1 / X-Pro2 / X-T1 / X-T10
It is necessary to upgrade the firmware of cameras above at the same time.
*The firmware upgrade of the lenses should be conducted after the upgrade of camera’s firmware upgrade.

Camera Body Firmware Compatibility Table

Firmware Update Steps

  1. Check the firmware version.
  2. Prepare a formatted memory card.
  3. Download the firmware (zip file) and decompress it.
  4. Copy the decompressed firmware to the card.
  5. Put the memory card with the firmware in the camera and update it.
Detail of firmware update steps

Precaution

If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here*Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.

  • You can update the firmware from old version directly to the latest one.
  • Firmware updating requires approximately 5 minutes.(maximum)
  • Once the firmware has been updated, some data of the previous version cannot be restored.
  • Please check here if you encounter any problems.

Error messages and responses

Download

License Agreement

Please read this Agreement carefully before downloading this upgraded version software (“FIRMWARE”). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.

Article 1. License

FIRMWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you included with FUJI’s product(s) (“ORIGINAL FIRMWARE”). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 2. NO Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.

Article 3. Restrictions

You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.

DownloadFile name: XFUP0019.zip

Caution

*Make sure there isn’t any file with the same name in the destination of the firmware to save. If there is a file with the same name, the browser may automatically alter the name of the firmware like the name and (1). A camera will not recognize the firmware correctly with an altered name like that.

*This file is a compressed file of zip format. After downloading it, decompress it and then install it.

Firmware compatibility table

  • Please use your camera and lens with the latest version of firmware. If you don’t use them with the latest version, you may not enjoy their full performance. Check the compatibility table below.
CamerasLenses