FUJIFILM X Webcam

Windows Version: Ver.2.1

Last Updated: 02.03.2021

Mac Version: Ver.2.1

Last Updated: 02.03.2021

Overview

【NEWS】
Notice of Applications Software Used with “macOS 14.0 Sonoma”

 

This software is to install the “FUJIFILM X Webcam” to your PC.
By connecting your PC to your camera via a USB cable, set up easily a web conference with high image quality.

Compatibility
FUJIFILM X Webcam compatibility chart

How to use
FUJIFILM X Webcam Features & User Guide

Operation confirmed App (as of February 3 2021)
Windows10:
Google Meet (Chrome/Edge*), Teams (Chrome/Edge*/App), Skype (Chrome/Edge*), Zoom (Chrome/Edge*/App), Messenger Rooms (Chrome/Edge*), OBS Studio
macOS:
Google Meet (Chrome/Edge*), Teams (Chrome/Edge*), Skype (Chrome/Edge*), Zoom (Chrome/Edge*/App), Messenger Rooms (Chrome/Edge*), LINE, OBS Studio
*Chromium Edge  

Depending on the application software to run the “X Webcam”, such as LINE, the operation menu for X Webcam becomes grayed out so that the camera cannot be operated.

 

macOS is a trademark of Apple Inc. registered in the United States and other countries.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
All other products and service names are trademarks or registered trademarks of each company.

Notes

Please read this update after refreshing this page.

  • In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the “Control” key and “F5” key.
  • In case of Mac (Safari / Google Chrome), hold down the “Command” key and “R” key.
  • In case of Mac (FireFox), hold down the “Command”, “Shift” and “R” keys at same time.
  • Windows
  • Mac

Detail of the software update

Ver.2.1

The software update Ver.2.1 incorporates the following issue:

Compatibility with "Nostalgic Negative" film simulation is added.

Ver.2.0

The software update Ver.2.0 incorporates the following issue:

Camera settings (*1) can be changed during an online meeting.

This upgrade will create the “X Webcam 2” icon. Clicking the icon will make the control panel appear and you can change some settings of the camera.

 *1: Changeable settings
   FILM SIMULATION (*2), INSTANT AF (*3), AE LOCK, DIGITAL ZOOM (*2), EXPOSURE COMPENSATION and WHITE BALANCE
 *2: Options and magnification depend on the models.
 *3: In case of X-Pro2, the INSTANT AF and AE LOCK can be used in MF mode.

<Note>
 ・Regarding the details, download the “FUJIFILM X Webcam Features & User Guide” from our website. 
 ・Applicable models are GFX100, GFX 50S, GFX 50R, X-H1, X-Pro3, X-Pro2, X-T4, X-T3 and X-T2.

How to Install

  1. Download the zip file from this page.
  2. Decompress the downloaded zip file and double-click it to carry out set-up.
  3. Once the installation is completed, click “Complete” button in the dialog appeared.
    Restart your PC.

System Requirements

OS Windows 11(×64), Windows 10(×64)
RAM

4GB and more recommended

 

Download

FUJIFILM X Webcam License Agreement

Please read this Agreement carefully before downloading this FUJIFILM X Webcam (“Software”)of FUJIFILM Corporation (“Fuji”). By checking the “Agree” box below, you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download Software.

Article 1. License

Fuji grants you a nontransferable, nonexclusive, non-redistributable license to:
(i) install this Software onto computers in binary machine executable form; and
(ii) use this Software on the computer onto which the Software is installed for the purpose of  using Fuji’s products.
If you violate this Agreement, Fuji may immediately terminate this license based on this article without any notice.

Article 2. Attribution of rights

All copyrights and other proprietary rights to this Software are retained by Fuji, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 3. Restrictions

You shall not, or shall not have any third party;
(i) use this Software for any purpose other than those specified in Article 1;
(ii) use, copy, distribute, etc. this Software beyond the scope specified in Article 1;
(iii) modify, adapt, translate, alter, reverse-engineer, decompile, or disassemble this Software; or
(iv) export this Software in violation of applicable export control related laws and regulations.

Article 4. Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR THIS SOFTWARE. THIS SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE THIS SOFTWARE.

Article 5. Version-Up

If Fuji provides an upgraded version of this Software to you and you download and use the upgraded version hereof, this Agreement shall also apply to such upgraded version.

Article 6. Governing Law / Jurisdiction

(1) This Agreement shall be governed by the laws of Japan.
(2) The Tokyo District Court shall have exclusive jurisdiction over the first instance for any dispute concerning this Agreement.

Article 7. Severability

If it is determined that any provision of this Agreement is invalid or unenforceable, such invalidity or unenforceability shall not render this Agreement in valid or unenforceable as a whole, and such provision shall be changed and interpreted so as to best accomplish the objective of such provision.

DownloadFile name: XWebcamIns210.zip
  • Windows
  • Mac

Detail of the software update

Ver.2.1

The software update Ver.2.1 incorporates the following issue:

Compatibility with "Nostalgic Negative" film simulation is added.

Ver.2.0

The software update Ver.2.0 incorporates the following issue:

Camera settings (*1) can be changed during an online meeting.

This upgrade will create the “X Webcam 2” icon. Clicking the icon will make the control panel appear and you can change some settings of the camera.

 *1: Changeable settings
   FILM SIMULATION (*2), INSTANT AF (*3), AE LOCK, DIGITAL ZOOM (*2), EXPOSURE COMPENSATION and WHITE BALANCE
 *2: Options and magnification depend on the models.
 *3: In case of X-Pro2, the INSTANT AF and AE LOCK can be used in MF mode.

<Note>
 ・Regarding the details, download the “FUJIFILM X Webcam Features & User Guide” from our website. 
 ・Applicable models are GFX100, GFX 50S, GFX 50R, X-H1, X-Pro3, X-Pro2, X-T4, X-T3 and X-T2.
 ・The setting change function cannot be used in LINE application.

How to Install

  1. Download the pkg file from this page.
  2. Decompress the downloaded zip file and double-click it to carry out set-up.
    * Install it following directions appeared on dialogs.
  3. Once the installation is completed, click “Restart” button in the dialog appeared.

System Requirements

OS macOS 13, 12, 11, 10.15, 10.14, 10.13, 10.12
RAM 4GB and more recommended

Download

FUJIFILM X Webcam License Agreement

Please read this Agreement carefully before downloading this FUJIFILM X Webcam (“Software”)of FUJIFILM Corporation (“Fuji”). By checking the “Agree” box below, you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download Software.

Article 1. License

Fuji grants you a nontransferable, nonexclusive, non-redistributable license to:
(i) install this Software onto computers in binary machine executable form; and
(ii) use this Software on the computer onto which the Software is installed for the purpose of  using Fuji’s products.
If you violate this Agreement, Fuji may immediately terminate this license based on this article without any notice.

Article 2. Attribution of rights

All copyrights and other proprietary rights to this Software are retained by Fuji, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.

Article 3. Restrictions

You shall not, or shall not have any third party;
(i) use this Software for any purpose other than those specified in Article 1;
(ii) use, copy, distribute, etc. this Software beyond the scope specified in Article 1;
(iii) modify, adapt, translate, alter, reverse-engineer, decompile, or disassemble this Software; or
(iv) export this Software in violation of applicable export control related laws and regulations.

Article 4. Warranty

FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR THIS SOFTWARE. THIS SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE THIS SOFTWARE.

Article 5. Version-Up

If Fuji provides an upgraded version of this Software to you and you download and use the upgraded version hereof, this Agreement shall also apply to such upgraded version.

Article 6. Governing Law / Jurisdiction

(1) This Agreement shall be governed by the laws of Japan.
(2) The Tokyo District Court shall have exclusive jurisdiction over the first instance for any dispute concerning this Agreement.

Article 7. Severability

If it is determined that any provision of this Agreement is invalid or unenforceable, such invalidity or unenforceability shall not render this Agreement in valid or unenforceable as a whole, and such provision shall be changed and interpreted so as to best accomplish the objective of such provision.

DownloadFile name: XWebcamIns210.pkg