X-S10 Compatibility Chart

* SanDisk cards are recommended.
*1 Compatible with UHS-I 4GB – 256GB
*2 Use a memory card with a class 10 write speed (10MB/s) or better when shooting HD movie.
*3 UHS with a class 3 write speed is recommended for 4K movie recording.

* Learn more about the terminal types from the FAQ link below.
FAQ – USB cable
FAQ – HDMI cable

* Learn more about the operation confirmed mobile battery and its use from the FAQ link below.
FAQ – mobile battery

*1 XF16-55mmF2.8 R LM WR , XF18-55mmF2.8-4 R LM OIS , XF18-135mmF3.5-5.6 R LM OIS WR , XF35mmF2 R WR、XF23mmF1.4 R , XF56mmF1.2 R , XC15-45mmF3.5-5.6 OIS PZ

Camera functions that can be controlled with WEEBILL2

• “Start” and “Stop” control function for the camera recording by “Photo/Video Button” on WEEBILL2
• “ISO sensitivity ” selecting function for the camera by “Control Wheel” on WEEBILL2
   

Camera settings

• Please set the camera to “MOVIE MODE”.
• Set “SET UP > CONNECTION SETTINGS > CONNECTION MODE” to “USB TETHER SHOOT AUTO”.
• Select the ISO sensitivity in the “FUNCTION SELECTION” menu that appears through the following operation.
  　　[SET UP] > [BUTTON/DIAL SETTING] > [LOCK] > [LOCK SETTING]
• After connecting the camera and gimbal with the USB cable, turn on the power of the camera and then the power of WEEBILL2.
• Set the shutter speed and aperture prior to recording.
   

Notes

• X-S10 with some lenses require “Lens Support” or “Camera Backing Base” to attach onto WEEBILL2.
• You can not change Battery NP-W126S and memory cards while X-S10 is mounted on WEEBILL2.
• If the ISO sensitivity cannot be changed with the “Control Wheel” on WEEBILL2 , change the setting from “ISO” to “Aperture” in the menu of the Gimbal and then set it back to “ISO”.