This website uses cookies. By using the site you are agreeing to our Privacy Policy.

FUJIFILM WIRELESS COMMANDER
EF-W1

A commander that broadens the field of creativity

Using a radio-controlled wireless communication system to control the flashes, the EF-W1 would allow customers to challenge on their creative works without any compromise due to the surrounding environment.

© Leo Pan
GFX100
ISO 400 / F8 / 1/125
© Leo Pan
GFX100
ISO 200 / F8 / 1/125

Greater freedom with a Radio-controlled wireless communications system

This commander unit uses radio-controlled wireless communications to remotely trigger EF-60’s diverse functions including the TTL mode, Manual mode and FP High-Speed Sync mode. It can simultaneously control multiple remote flash units, which can be divided into four groups to accept different settings.


The commander and remote flash units communicate with radio control. This means remote flashes can be placed in positions far away or out of direct line-of-sight from the commander, and used even in bright ambient light, giving greater freedom than the conventional optical communications system in configuring a shooting set-up, thereby broadening possibilities in photographic expressions.


The EF-W1 uses NAS (Nissin Air System)*1 for radio-controlled wireless communications. This means the commander makes the X and GFX Series of camera systems compatible not only with the EF-60 but also with a variety of NAS-based speedlights offered by Nissin Japan Ltd.

Fine-control of the "Light"

The EF-W1 allows you to control output in 1/3EV increments in both output compensation in the TTL mode and power control in the Manual mode. In the Manual mode, the output level can be reduced to as low as 1/256. This ability to adjust the flash output in greater detail facilitates intricate expressions in flash photography.

Model Name FUJIFILM WIRELESS COMMANDER EF-W1
News release View Page
Declaration of conformity View PDF

Compatibility

Compatible Cameras

GFX100 / GFX 50S / GFX 50R / X-H1 / X-Pro3 / X-Pro2 / X-T4 / X-T3 / X-T2 / X-T1 / X-T30 / X-T20 / X-E3 / X100V / X100F

Other compatible device

Nissin flash with Nissin Air System(NAS)

Specification

Wireless Communication Unit
Communication Method NAS(Nissin Air System)*1
Frequency Range Used (center frequency) 2409 – 2476 MHz
Wireless Maximum Output 8 dBm (EIRP)
Communication Channel 8 channels
Remote Group
Maximum number of flashes used simultaneously 30
Functions
Action mode Radio Wireless Commander (TTL, Manual, OFF)
TTL Flash Exposure Compensation Control ±2EV, 1/3EV steps
Manual Flash Control 1/1 – 1/256, 1/3EV steps
FP (high speed sync) Emission Control Compatible (when using a compatible camera)
The Coverage (zoom) 24 – 200mm (35mm format conversion), auto zoom
Recycling Time Max. approx. 10 times/second
Other Functions Firemware update by microSD card, open mode*2, modeling light control*2 that allows to
control one flash from multiple wireless commanders.
Power Supply and Others
No. of Flashes Approx. 3,000 times (when using alkaline batteries)*3
Power Supply 2 x AAA batteries (Ni-MH batteries, alkaline batteries)
Using Temperature Range -10 to 40 degrees Celsius
Dimension (Height x Width x Depth) Approx. 61mm x 62mm x 68mm
Weight Approx. 73g (without battery)

NOTES

*1 NAS(Nissin Air System) is a registered trademark of Nissin Japan Ltd.

*2 Compatible with MG10, MG8, MG80 Pro manufactured by Nissin Digital.

*3 It depends on the shooting conditions and batteries used.

RECENTLY VIEWED ITEMS